Operating Instructions

Chapter 4 Operation — Menu settings
- 63 -
[ATW]
You can set ATW (auto tracking white balance function) when the <WHITE BAL> button is pressed.
(Factory setting: [OFF])
[ATW SPEED]
Sets the control speed of the auto tracking white balance function.
The items that can be set are as follows.
≥ [FAST], [NORMAL]
(Factory setting: [NORMAL])
[ATW TARGET R]
Make fine adjustments to the strength of red when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[ATW TARGET B]
Make fine adjustments to the strength of blue when converging with the auto tracking white balance operation.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[W.BAL PRESET]
Sets the color temperature for when the <WHITE BAL> button is pressed to switch to "Preset".
The items that can be set are as follows.
≥ [3200K], [5600K], [VAR]
(Factory setting: [3200K])
[W.BAL VAR]
Sets the value of [VAR] in [W.BAL PRESET].
The setting can also be operated by the multidial.
This is enabled when [W.BAL PRESET] is set to [VAR] and you press the <WHITE BAL> button to switch to “Preset”.
The items that can be set are as follows.
≥ [2000K]…[15000K]
(Factory setting: [3200K])
[H.ZOOM SPEED]
Sets the zoom speed of the handle zoom.
The items that can be set are as follows.
≥ [1]…[7]
(Factory setting: [4])
[i.ZOOM]
When [i.ZOOM] is set to [ON], you can zoom to a maximum of approximately 48× (32× when recording with UHD) while maintaining the beauty of high-
definition image quality.
(Factory setting: [OFF])
[REAR RING]
Switches the rear ring operation.
(Factory setting: [ZOOM])
@
NOTE
0 You can also either press the USER button assigned to [REAR RING] or touch the USER button icon to switch the setting of the rear ring operation.
[Ach] If you have pressed the <WHITE BAL> button to switch to [Ach], this is set to [ATW].
[Bch] If you have pressed the <WHITE BAL> button to switch to [Bch], this is set to [ATW].
[PRE] If you have pressed the <WHITE BAL> button to switch to “Preset”, this is set to [ATW].
[OFF] Even if you press the <WHITE BAL> button, [ATW] does not turn on.
[ON] Enables the i.ZOOM function.
[OFF] Disables the i.ZOOM function.
[ZOOM] Performs zoom operations with the rear ring.
[IRIS] Adjusts the iris with the rear ring.
[IRIS/AE LEVEL] Adjusts the iris or AE level with the rear ring.