Operating Instructions

Chapter 4 Operation — Menu settings
- 73 -
@
NOTE
0 For the combinations that can be set, refer to “Format that can be output from the <SDI OUT> terminal [X2000]”. ( l 154)
[SDI AUDIO GAIN CHG]
Adjusts the gain for the audio signal output from the <SDI OUT> terminal.
The items that can be set are as follows.
≥ [0dB], [j6dB], [j8dB]
(Factory setting: [j6dB])
[SDI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <SDI OUT> terminal (such as recorder) is to be controlled or not.
(Factory setting: [OFF])
@
NOTE
0 This cannot be set when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL].
0 The AUTO REC signal is compatible with TYPE3 when remotely recording with SDI.
[SDI OUT CHAR]
Sets whether to superimpose the character to the output from the <SDI OUT> terminal.
(Factory setting: [OFF])
[SDI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <SDI OUT> terminal. The settings of the zebra signal follow the zebra signal settings
in the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
(Factory setting: [OFF])
[HDMI OUT]
¥Set the [VIDEO OUT/LCD/VF] menu → [VIDEO OUT SEL] to [HDMI].
[OUT FORMAT]
Selects the signal to output from the <HDMI> terminal. The items that can be selected differ depending on the [SYSTEM] menu → [FREQUENCY]/[FILE
FORMAT]/[REC FORMAT] setting.
(Factory setting: [1920×1080p])
@
NOTE
0 For the combinations that can be set, refer to “Format that can be output from the <HDMI> terminal”. (l 155)
[HDMI TC OUT]
Sets if the time code information is output or not in the output from the <HDMI> terminal.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[HDMI REC REMOTE]
Sets if the recording operation against the external equipment connected to the <HDMI> terminal (such as recorder) is to be controlled or not. This can be
set when [HDMI TC OUT] in [HDMI OUT] is enabled.
(Factory setting: [OFF])
@
NOTE
0 This cannot be set when the [RECORDING] menu → [REC FUNCTION] → [REC MODE] is set to [INTERVAL].
[ON] Controls the recording operation of the external equipment.
[OFF] Does not control the recording operation of the external equipment.
[ON] Superimposes.
[OFF] Does not superimpose.
[ON] Superimposes.
[OFF] Does not superimpose.
[3840×2160p] Outputs in 3840×2160p (4:2:2/10 bit).
[3840×2160p(420/8bit)] Outputs in 3840×2160p (4:2:0/8 bit).
[1920×1080p] Outputs in 1920×1080p.
[1920×1080i] Outputs in 1920×1080i.
[1280×720p] Outputs in 1280×720p.
[720×480p] Outputs in 720×480p.
[720×576p] Outputs in 720×576p.
[ON] Controls the recording operation of the external equipment.
[OFF] Does not control the recording operation of the external equipment.