Operating Instructions

Chapter 4 Operation — Menu settings
- 74 -
[HDMI OUT CHAR]
Sets whether to superimpose the character to the output from the <HDMI> terminal.
(Factory setting: [OFF])
[HDMI OUT ZEBRA]
Sets whether to superimpose the zebra signal to the output from the <HDMI> terminal. The settings of the zebra signal follow the zebra signal settings in
the [VIDEO OUT/LCD/VF] menu → [EI ASSIST].
(Factory setting: [OFF])
[LCD]
≥ These settings will not affect the images actually recorded.
[BRIGHTNESS]
Adjusts the brightness of the LCD monitor.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[COLOR LEVEL]
Adjusts the color level of the LCD monitor.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[CONTRAST]
Adjusts the contrast of the LCD monitor.
The items that can be set are as follows.
≥ [j15]…[i15]
(Factory setting: [0])
[BACK LIGHT]
Adjusts the brightness of the LCD monitor backlight. [0] is the standard brightness.
The items that can be set are as follows.
≥ [j1], [0], [1], [2]
(Factory setting: [0])
[RED TINT]
Finely adjusts the strength of red on the LCD monitor.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[BLUE TINT]
Finely adjusts the strength of blue on the LCD monitor.
The items that can be set are as follows.
≥ [j10]…[i10]
(Factory setting: [0])
[SELF SHOOT]
Sets the display of the LCD monitor when mirror shooting is performed.
(Factory setting: [MIRROR])
[ON] Superimposes.
[OFF] Does not superimpose.
[ON] Superimposes.
[OFF] Does not superimpose.
[NORMAL] Does not invert the left and right sides.
[MIRROR] Inverts the left and right sides.