Operating Instructions

Chapter 4 Operation — Menu settings
- 82 -
[UB MODE]
Selects the user bits mode. User bits information is recorded in the clip.
(Factory setting: [USER])
[REC COUNTER]
Sets operation of the counter for recording.
(Factory setting: [TOTAL])
[TIME STAMP]
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the [DATE FORMAT] setting.
(Factory setting: [OFF])
[NETWORK] menu
Sets the setting regarding the network function.
[DEVICE SEL]
Select the device that connects external equipment (computer, etc.) to the unit.
The unit may restart when the setting is changed.
(Factory setting: [OFF])
[NETWORK FUNC]
Selects the network function of the unit.
(Factory setting: [OFF])
[FRAME RATE] Selects the image information (such as frame rate) of the camera.
[USER] Selects the user bits set in [UB PRESET].
[TIME] Selects the local time. (hh, mm, ss)
[DATE] Selects the local date and time. (YY, MM, DD, hh)
[TC] Records the time code value as user bits.
[CLIP NAME] Records the value that CAM INDEX (one character) and CARD COUNT (3-digit number) both converted to ASCII character
code.
Only enabled when the [SYSTEM] menu → [FILE FORMAT] → [MOV] or [MP4] is set.
[TOTAL] The count continues cumulatively until either you press the USER button assigned to [RESET] or touch the USER button icon.
[CLIP] Clears the counter value at the start of recording and counts the time for each recording.
[OFF] Does not superimpose the date and time.
[DATE] Superimposes only the date.
[TIME] Superimposes only the time.
[DATE&TIME] Superimposes the date and time.
[WLAN] Connects via a wireless LAN.
[OFF] Does not connect.
[STREAMING] Enables the streaming function.
[OFF] Does not use the network function.