Operating Instructions
Chapter 4 Operation — Handling setting data
- 99 -
Setup file
You can save the setting information for this unit to the main unit memory or a memory card in card slot 1, and load it from a memory card into this unit.
Saving the setup file
The setup file can be overwritten to a file on the main unit memory or memory card in card slot 1, or saved as a new file.
Saving the setup file as a new file to the memory card
Specify a file name to save the current setting values of the unit to the memory card in card slot 1 as a new file.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE AS].
The file name entry screen and the keyboard are displayed.
2
Enter the text to set with the keyboard.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
≥ An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages”. (l 185)
Saving the setup file by overwriting a file on the memory card
Overwrites the file selected in the list of the setup files saved on the memory card with the current setting values of the unit.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [SAVE].
The list of setup files saved on the memory card in card slot 1 is displayed.
2
Select the file to overwrite from the list of setup files.
The file name entry screen and the keyboard are displayed. Leave it as is when overwriting.
3
Select [Enter].
A confirmation screen is displayed.
4
Select [SET].
The file is saved.
Saving the setup file to the main unit memory
Saves the current setting value of the unit into the main unit memory.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [SAVE].
2
Select [SET].
The file is saved.
Loading the setup file
Loading setup files from the memory card
Loads the setup file saved on the memory card in card slot 1.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(SD CARD)] → [LOAD].
The list of setup files stored in the specified folder of the memory card in card slot 1 is displayed.
≥ You can also either press the USER button assigned to [LOAD SETUP FILE] or touch the USER button icon to display the list of setup files.
2
Select the file name for the file to load.
3
Select [SET].
Loading of the file is started. The unit is restarted after loading.
≥ An error message may be displayed. For details about the error message, refer to “Cases indicated by error messages”. (l 185)
≥ The file saved by a camera with different firmware version may not be able to load.
Loading setup files from the main unit memory
Loads the setup file saved on the main unit memory.
1
Select the [OTHERS] menu → [FILE] → [SETUP FILE(MEMORY)] → [LOAD].
2
Select [SET].
Loading of the file is started. The unit is restarted after loading.