Operating instructions

- 141 -
Attaching a wireless module that support this unit (l 142) to the USB HOST terminal of this unit
allows you to connect to a wireless LAN network. You can remotely control some functions by
connecting this unit and an iPad on which the AG ROP application is installed.
A Wireless module that support this unit
B Direct connection
C Wireless access point connection
D iPad and AG ROP application
You can perform the following remote control operations with the AG ROP application:
≥ Checking the camera status
≥ Checking the thumbnails of the recorded scenes
≥ Playing back scenes recorded as sub recordings with [DUAL CODEC REC] set to [FHD 8Mbps]
≥ Controlling the camera remotely (recording control and Time Code/User Information operations)
≥ For information on how to operate the AG ROP application, refer to its Help.
≥ You can store a wireless module in the hand strap.
Linking to external devices
Using an iPad as a Remote Control
(AG ROP application)

USB
HOST
HC-X1_E_GC_DVQP1176ZA_eng.book 141 ページ ２０１６年１１月２８日 月曜日 午前１１時４０分
- 141 -
Attaching a wireless module that support this unit (l 142) to the USB HOST terminal of this unit
allows you to connect to a wireless LAN network. You can remotely control some functions by
connecting this unit and an iPad on which the AG ROP application is installed.
A Wireless module that support this unit
B Direct connection
C Wireless access point connection
D iPad and AG ROP application
You can perform the following remote control operations with the AG ROP application:
≥ Checking the camera status
≥ Checking the thumbnails of the recorded scenes
≥ Playing back scenes recorded as sub recordings with [DUAL CODEC REC] set to [FHD 8Mbps]
≥ Controlling the camera remotely (recording control and Time Code/User Information operations)
≥ For information on how to operate the AG ROP application, refer to its Help.
≥ You can store a wireless module in the hand strap.
Linking to external devices
Using an iPad as a Remote Control
(AG ROP application)

USB
HOST
HC-X1_E_GC_DVQP1176ZA_eng.book 141 ページ ２０１６年１１月２８日 月曜日 午前１１時４０分
- 141 -
Povezivanje s vanjskim uređajima
Upotreba iPada kao daljinskog
upravljača (aplikacija AG ROP)
Povezivanje bežičnog modula koji podržava ovaj uređaj ( 142) s glavnim USB-priključkom ovog
uređaja omogućuje vam povezivanje na bežičnu LAN mrežu. Povezivanjem ovoga uređaja s iPadom
na kojemu je instalirana aplikacija AG ROP možete daljinski upravljati određenim funkcijama.
A
Bežični modul koji podržava ovaj uređaj
B
Izravno povezivanje
C
Veza putem bežične pristupne točke
D
iPad i aplikacija AG ROP
S pomoću aplikacije AG ROP možete izvršavati sljedeće radnje daljinskog upravljanja:
● provjeru statusa kamere
● provjeru minijatura snimljenih scena
● reprodukciju scena snimljenih kao sporedne snimke s pomoću opcije [DUAL CODEC REC]
(Snimanje dvostrukim kodekom) postavljene na [FHD 8Mbps]
● daljinsko upravljanje kamerom (kontrola snimanja i radnje koje uključuju vremenski kod /
informacije o korisniku)
● Informacije o tome kako upravljati aplikacijom AG ROP potražite u njezinom izborniku pomoći.
● Bežični modul možete čuvati u vrpci za nošenje.