Operating instructions
- 22 -
∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional)
can be attached. Check in advance whether the microphone you wish to use can be attached.
1 Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2 Attach an external microphone (optional) to the
microphone holder, and tighten the microphone
holder screw.
3 Connect the external microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use the cable clamper of
this unit.
≥ Keep the microphone holder screw, INPUT terminal cap out of
reach of children to prevent swallowing.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.
A Microphone holder attachment part
B Microphone holder
C Microphone holder mounting screws
D AUDIO INPUT1 terminal (XLR 3 pin)
E Microphone cable clamper
F Microphone holder screw
G External microphone (optional)
A INPUT terminal cap
HC-X1_E_GC_DVQP1176ZA_eng.book 22 ページ 2016年11月28日 月曜日 午前11時40分
- 22 -
∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional)
can be attached. Check in advance whether the microphone you wish to use can be attached.
1 Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2 Attach an external microphone (optional) to the
microphone holder, and tighten the microphone
holder screw.
3 Connect the external microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use the cable clamper of
this unit.
≥ Keep the microphone holder screw, INPUT terminal cap out of
reach of children to prevent swallowing.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.
A Microphone holder attachment part
B Microphone holder
C Microphone holder mounting screws
D AUDIO INPUT1 terminal (XLR 3 pin)
E Microphone cable clamper
F Microphone holder screw
G External microphone (optional)
A INPUT terminal cap
HC-X1_E_GC_DVQP1176ZA_eng.book 22 ページ 2016年11月28日 月曜日 午前11時40分
- 22 -
∫ Attaching the front microphone
≥ The microphone holder is set up so that a 21 mm external microphone (AG-MC200G: optional)
can be attached. Check in advance whether the microphone you wish to use can be attached.
1 Attach the microphone holder to the microphone holder attachment part.
≥ Attach by using a commercially available screw driver.
≥ When attaching the microphone holder, be sure to tighten the screws firmly even though you
might hear a squeaking sound.
2 Attach an external microphone (optional) to the
microphone holder, and tighten the microphone
holder screw.
3 Connect the external microphone to the AUDIO
INPUT1 terminal (XLR 3 pin).
≥ When wiring the microphone cable, use the cable clamper of
this unit.
≥ Keep the microphone holder screw, INPUT terminal cap out of
reach of children to prevent swallowing.
∫ Attaching the INPUT terminal cap
Attach the INPUT terminal cap while the AUDIO INPUT1, 2 terminals (XLR 3 pin) are not used.
A Microphone holder attachment part
B Microphone holder
C Microphone holder mounting screws
D AUDIO INPUT1 terminal (XLR 3 pin)
E Microphone cable clamper
F Microphone holder screw
G External microphone (optional)
A INPUT terminal cap
HC-X1_E_GC_DVQP1176ZA_eng.book 22 ページ 2016年11月28日 月曜日 午前11時40分
- 22 -
▄
Pričvršćivanje prednjeg mikrofona
● Držač mikrofona postavljen je tako da se može pričvrstiti vanjski mikrofon od 21 mm (AG-MC200G:
neobavezan). Unaprijed provjerite može li se pričvrstiti mikrofon koji želite upotrebljavati.
1 Pričvrstite držač mikrofona na dio za spajanje držača mikrofona.
● Pričvrstite s pomoću komercijalno dostupnog križnog odvijača.
● Kada pričvršćujete držač mikrofona, obavezno čvrsto pritegnite vijke, čak i ako čujete škripanje.
A Dio za pričvršćivanje držača mikrofona
B Držač mikrofona
C Vijci za postavljanje držača mikrofona
2 Pričvrstite vanjski mikrofon (neobavezan)
na držač mikrofona i zategnite vijak držača
mikrofona.
3 Spojite vanjski mikrofon na priključak AUDIO
INPUT1 (Audioulaz1) (XLR 3-pinski).
● Kada spajate električne instalacije kabela za mikrofon,
upotrijebite stezaljke za kabele za ovaj uređaj.
● Držite vijak držača mikrofona i poklopac ULAZNOG priključka
izvan dohvata djece da biste spriječili da ih slučajno progutaju.
D Priključak AUDIO INPUT1 (XLR 3-pinski)
E Stezaljka za kabel mikrofona
F Vijak držača mikrofona
G Vanjski mikrofon (neobavezan)
▄
Pričvršćivanje poklopca priključka INPUT (Ulaz)
Pričvrstite poklopac ulaznog priključka kada se priključci AUDIO INPUT1 i 2 (XLR 3-pinski) ne
upotrebljavaju.
A Poklopac ulaznog priključka