Operating instructions

ManualsBrandsPanasonic ManualsCamcordersHCX1E

- 58 -

∫ To change the peaking settings

If you set Focus Assist to ON by following either of the

procedures below, in-focus portions are highlighted with

color (peaking).

j Setting the menu item [FOCUS ASSIST 1] to

[PEAKING] or [BOTH] and pressing the FOCUS

ASSIST button or the USER button to which [FOCUS ASSIST 1] is registered.

j Setting the menu item [FOCUS ASSIST 2] to [PEAKING] and pressing the USER button to

which [FOCUS ASSIST 2] is registered.

G: Peaking

≥ You can set the peaking color and strength.

(When changing the peaking color)

Select the menu.

(When setting the peaking strength)

1 Select the menu.

2 Touch / to adjust settings.

≥ You can select a value between s7 and r7.

3 Touch [EXIT] to complete the setting.

(Notes on Focus Assist)

≥ Focus Assist is not possible in following cases:

j During Recording Check (l 88)

j During Freeze Frame (l 89)

j When color bars are displayed (l 106)

≥ Focus Assist is canceled in following cases:

j If you turn the unit off

j (If you operate the FOCUS ASSIST button or the USER button to which [FOCUS ASSIST 1] is

registered)

When the setting of [FOCUS ASSIST 1] (l 56) is changed

j (If you operate the USER button to which [FOCUS ASSIST 2] is registered)

When the setting of [FOCUS ASSIST 2] (l 56) is changed

j When you set this unit to Auto Focus

j When you press the USER button to which [FOCUS TRANS] is registered or touch the

applicable USER button icon (l 61)

≥ The magnified display and peaking are not displayed on recorded images.

≥ The magnified display and peaking are not displayed on an external monitor.

≥ Freeze Frame is not available when you use Focus Assist. (l 89)



: [SW SETUP] # [PEAKING COLOUR] # desired color

[Red]/[Blue]/[Yellow]/[White]

: [SW SETUP] # [PEAKING LEVEL] # desired setting

HC-X1_E_GC_DVQP1176ZA_eng.book 58 ページ２０１６年１１月２８日　月曜日　午前１１時４０分

- 58 -

▄

Promjena postavki fokusiranja

jasnih objekata

Ako pomoć pri fokusiranju postavite na ON (Uklj.)

putem jednog od postupaka u nastavku, fokusirani

dijelovi ističu se bojom (fokusiranje jasnih objekata).

– Postavljanjem stavke izbornika [FOCUS ASSIST 1]

(Pomoć pri fokusiranju 1) na [PEAKING]

(Fokusiranje jasnih objekata) ili [BOTH] (Oboje) i pritiskom gumba FOCUS ASSIST (Pomoć pri

fokusiranju) ili gumba USER (Korisnik) na koji je memorirana funkcija [FOCUS ASSIST 1].

– Postavljanjem stavke izbornika [FOCUS ASSIST 2] na [PEAKING] i pritiskom gumba USER

na koji je memorirana funkcija [FOCUS ASSIST 2].

G: fokusiranje jasnih objekata

● Možete postaviti boju i jačinu fokusiranja jasnih objekata.

(prilikom promjene boje fokusiranja jasnih objekata)

Odaberite izbornik.

: [SW SETUP] (Postavke softvera) → [PEAKING COLOUR] (Boja fokusiranja jasnih

objekata) → željena postavka

[Red] (Crvena) / [Blue] (Plava) / [Yellow] (Žuta) / [White] (Bijela)

(prilikom postavljanja jačine fokusiranja jasnih objekata)

1 Odaberite izbornik.

: [SW SETUP] → [PEAKING LEVEL] (Razina fokusiranja jasnih objekata) →

željena postavka

2 Dodirnite da biste podesili postavke.

● Možete odabrati vrijednost između -7 i +7.

3 Dovršite postavljanje dodirom na [EXIT] (Izlaz).

(Napomene o pomoći pri fokusiranju)

● Pomoć pri fokusiranju nije moguća u sljedećim slučajevima:

– tijekom provjere snimanja ( 88)

– tijekom zamrznutog kadra ( 89)

– kada su prikazane trake boje ( 106)

● Pomoć pri fokusiranju poništava se u sljedećim slučajevima:

– ako isključite uređaj

– (ako upotrebljavate gumb FOCUS ASSIST ili gumb USER na koji je memorirana funkcija

[FOCUS ASSIST 1])

– kada se promijeni postavka [FOCUS ASSIST 1] ( 56)

– (ako upotrebljavate gumb USER na koji je memorirana funkcija [FOCUS ASSIST 2])

kada se promijeni postavka [FOCUS ASSIST 2] ( 56)

– kada postavite uređaj na automatski fokus

– kada pritisnete gumb USER na koji je memorirana funkcija [FOCUS TRANS] (Prijelaz fokusa)

ili dodirnete odgovarajuću ikonu gumba USER ( 61)

● Uvećani prikaz i fokusiranje jasnih objekata nisu prikazani na snimljenim slikama.

● Uvećani prikaz i fokusiranje jasnih objekata nisu prikazani na vanjskom monitoru.

● Zamrznuti kadar nije dostupan kada upotrebljavate pomoć pri fokusiranju. ( 89)