Operating instructions
- 90 -
You can apply a variety of effects to the subject you touch.
∫ Setting an Area Mode effect
You can select the following menu items to set an effect to be applied when you touch the subject.
∫ Using Area Mode
≥ Register [AREA] to a USER button. (l 82)
1 Press the applicable USER button or touch the applicable USER button icon
on the recording screen.
≥ Area Mode will be enabled and will be displayed.
2 Touch the recording screen.
≥ The area frame will be displayed on the part you have
touched. The effect of the selected menu item will be
applied.
To turn off Area Mode
(With a USER button)
Press the USER button
(With a USER button icon)
1 Touch and hold the recording screen to display operation icons.
2 Touch the USER button icon.
To change the size of the area frame
You can rotate the jog dial to change the size of the
area frame.
≥ The area frame is available in three sizes.
[AREA]
: [SW SETUP] # [AREA MODE] # desired setting
[INH]: Does not apply any effects of Area Mode.
[FOCUS]: Optimizes the focus automatically for the subject you touch.
[IRIS]: Optimizes the iris automatically for the subject you touch.
[Y GET]: Displays the luminance level of the subject you touch.
[FOCUS/IRIS]: Optimizes the focus and iris automatically for the subject you touch.
[FOCUS/Y GET]: Optimizes the focus automatically for the subject you touch and
displays the luminance level of the subject.
A Area frame
MENU
HC-X1_E_GC_DVQP1176ZA_eng.book 90 ページ 2016年11月28日 月曜日 午前11時40分
- 90 -
You can apply a variety of effects to the subject you touch.
∫ Setting an Area Mode effect
You can select the following menu items to set an effect to be applied when you touch the subject.
∫ Using Area Mode
≥ Register [AREA] to a USER button. (l 82)
1 Press the applicable USER button or touch the applicable USER button icon
on the recording screen.
≥ Area Mode will be enabled and will be displayed.
2 Touch the recording screen.
≥ The area frame will be displayed on the part you have
touched. The effect of the selected menu item will be
applied.
To turn off Area Mode
(With a USER button)
Press the USER button
(With a USER button icon)
1 Touch and hold the recording screen to display operation icons.
2 Touch the USER button icon.
To change the size of the area frame
You can rotate the jog dial to change the size of the
area frame.
≥ The area frame is available in three sizes.
[AREA]
: [SW SETUP] # [AREA MODE] # desired setting
[INH]: Does not apply any effects of Area Mode.
[FOCUS]: Optimizes the focus automatically for the subject you touch.
[IRIS]: Optimizes the iris automatically for the subject you touch.
[Y GET]: Displays the luminance level of the subject you touch.
[FOCUS/IRIS]: Optimizes the focus and iris automatically for the subject you touch.
[FOCUS/Y GET]: Optimizes the focus automatically for the subject you touch and
displays the luminance level of the subject.
A Area frame
MENU
HC-X1_E_GC_DVQP1176ZA_eng.book 90 ページ 2016年11月28日 月曜日 午前11時40分
- 90 -
[AREA] (Područje)
Možete primijeniti razne efekte na objekt koji dodirnete.
▄
Postavljanje efekta načina područja
Možete odabrati sljedeće stavke izbornika da biste postavili efekt koji će se primijeniti kada
dodirnete objekt.
: [SW SETUP] (Postavke softvera) → [AREA MODE] (Način područja) → željena postavka
[INH] (Spriječi): Ne primjenjuje efekte načina područja.
[FOCUS] (Fokus): Automatski optimizira fokus za objekt koji dodirnete.
[IRIS] (Blenda): Automatski optimizira blendu za objekt koji dodirnete.
[Y GET] (Mjerač svjetline
objekta):
Prikazuje razinu osvijetljenosti objekta koji dodirnete.
[FOCUS/IRIS]
(Fokus/blenda):
Automatski optimizira fokus i blendu za objekt koji dodirnete.
[FOCUS/Y GET] (Fokus /
mjerač svjetline objekta):
Automatski optimizira fokus za objekt koji dodirnete i prikazuje
razinu osvijetljenosti objekta.
▄
Upotreba načina područja
● Memorirajte funkciju [AREA] na gumb USER (Korisnik). ( 82)
1 Pritisnite odgovarajući gumb USER ili dodirnite ikonu odgovarajućeg gumba
USER na zaslonu za snimanje.
● Omogućit će se način područja i prikazat će se .
2 Dodirnite zaslon za snimanje.
● Na dijelu koji ste dodirnuli prikazat će se okvir
područja. Primijenit će se efekt odabrane stavke
izbornika.
Isključivanje načina područja
(s pomoću gumba USER)
Pritisnite gumb USER
A
Okvir područja
(s pomoću ikone gumba USER)
1 Dodirnite i držite zaslon za snimanje za prikaz funkcijskih ikoni.
2 Dodirnite ikonu gumba USER.
Promjena veličine okvira područja
Možete zakretati multifunkcijski kotačić da biste
promijenili veličinu okvira područja.
● • Okvir područja dostupan je u tri veličine.