Operating instructions

- 99 -
4 Press USER button or touch USER button icon in the recording screen.
≥ This will display and send a signal to the external device instructing it to start recording.
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display and send a signal to the external
device instructing it to stop recording.
≥ Register [AF AREA] to a USER button. (l 82)
You can adjust the area width where Auto Focus works according to the size of the subject. (l 55)
1 Press USER button or touch USER button icon in the recording screen.
≥ are displayed on the screen.
2 Rotate the jog dial to adjust the AF area
frame.
3 Push the jog dial to fin
ish the adjustment.
≥ Press USER button or touch the USER button icon to cancel the setting.
≥ To adjust the AF area frame again, press the jog dial while the on-screen
icon [ AF AREA] (yellow) is displayed, and repeat Steps 2s3.
≥ For information on on-screen icons, refer to 111.
[AF AREA]
A [AF AREA]
B AF area frame
 
AF-AREA
HC-X1_E_GC_DVQP1176ZA_eng.book 99 ページ ２０１６年１１月２８日 月曜日 午前１１時４０分
- 99 -
4 Press USER button or touch USER button icon in the recording screen.
≥ This will display and send a signal to the external device instructing it to start recording.
≥ To stop recording to the external device, press the applicable USER button or touch the
applicable USER button icon again. This will display and send a signal to the external
device instructing it to stop recording.
≥ Register [AF AREA] to a USER button. (l 82)
You can adjust the area width where Auto Focus works according to the size of the subject. (l 55)
1 Press USER button or touch USER button icon in the recording screen.
≥ are displayed on the screen.
2 Rotate the jog dial to adjust the AF area
frame.
3 Push the jog dial to fin
ish the adjustment.
≥ Press USER button or touch the USER button icon to cancel the setting.
≥ To adjust the AF area frame again, press the jog dial while the on-screen
icon [ AF AREA] (yellow) is displayed, and repeat Steps 2s3.
≥ For information on on-screen icons, refer to 111.
[AF AREA]
A [AF AREA]
B AF area frame
 
AF-AREA
HC-X1_E_GC_DVQP1176ZA_eng.book 99 ページ ２０１６年１１月２８日 月曜日 午前１１時４０分
- 99 -
4 Pritisnite gumb USER ili dodirnite ikonu gumba USER na zaslonu za snimanje.
● Time će se prikazati i poslati signal vanjskom uređaju kojim mu se naređuje da započne
snimati.
● Da biste zaustavili snimanje na vanjskom uređaju, pritisnite odgovarajući gumb USER ili
ponovno dodirnite odgovarajuću ikonu gumba USER. Time će se prikazati i poslati signal
vanjskom uređaju kojim mu se naređuje da prestane snimati.
[AF AREA] (Područje auto. fokusa)
● Memorirajte funkciju [AF AREA] na neki gumb USER. ( 82)
Možete podesiti širinu područja automatskog fokusa u skladu s veličinom objekta. ( 55)
1 Pritisnite gumb USER ili dodirnite ikonu gumba USER na zaslonu za snimanje.
● se prikazuje na zaslonu.
2 Zakrenite multifunkcijski kotačić
da biste podesili okvir područja
automatskog fokusa.
A
[AF AREA] (Područje auto. fokusa)
B
Okvir područja automatskog fokusa
3 Pritisnite multifunkcijski kotačić da biste završili podešavanje.
● Pritisnite gumb USER ili dodirnite ikonu gumba USER za poništavanje
postavke.
● Da biste ponovno podesili okvir područja automatskog fokusa, pritisnite
multifunkcijski kotačić dok se na zaslonu prikazuje ikona [ AF AREA]
(žuta) i ponovite korake od 2. do 3.
● Informacije o ikonama na zaslonu potražite na 111. str.