Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 5 Shooting — Using the zoom function
- 116 -
Using fast zoom
When [FAST ZOOM] is assigned to a USER button, you can use fast zoom by operating the zoom lever (on the grip).
1
Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [FAST ZOOM].
2
Either press the USER button assigned to [FAST ZOOM] or touch the USER button icon.
3
Push the zoom lever (on the grip) until the end to zoom.
≥ The zoom ratio display changes during fast zoom. (For example: 99)
@
NOTE
0 When the [CAMERA] menu → [SW MODE] → [H.ZOOM SPEED] is set to [7], fast zoom can also be used by operating the zoom lever (on the handle).
0 As the operating noise of fast zoom will be louder than normal, the operating noise may be recorded during recording. If the operating noise is a
problem, disable [FAST ZOOM].
0 Auto focus may not be able to keep up during fast zoom, depending on the subject.
0 Fast zoom cannot be used in the following case:
j When interval recording is enabled