Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 5 Shooting — Image quality adjustment
- 119 -
Color correction function
This function sets color saturation and phase. Each of the 16 divisions of color hue can be set individually.
∫ General settings
Use the unit with the factory settings.
∫ Advanced settings
[R]/[R-Mg]/[Mg]/[Mg-Mg-B]/[Mg-B-B]/[B]/[B-B-Cy]/[B-Cy-Cy]/[Cy]/[Cy-G]/[G]/[G-G-Yl]/[G-YI-Yl]/[Yl]/[Yl-Yl-R]/[Yl-R-R]:
Changes the phase and saturation. When setting the phase, i is clockwise and j is counter-clockwise.
Black control function
This function sets the black level that is to be the reference of luminance.
∫ General settings
[MASTER PED]: Sets the reference black level. RGB also changes by changing this setting. j makes the black color darker, and i makes it less dark.
∫ Advanced settings
There are no setting items.
Gamma function
This function optimizes the tone of images.
∫ General settings
[GAMMA MODE SEL]: Selects a gamma mode from 8 types.
∫ Advanced settings
[BLACK GAMMA]: Sets the gamma curve compression and expansion of dark areas.
Knee function
This function sets the compression of video signals to prevent halation in images.
∫ General settings
Use the unit with the factory settings.
∫ Advanced settings
[KNEE MODE]: Sets the operation mode of knee function ([AUTO]/[LOW]/[MID]/[HIGH]/[OFF]).
White clip function
Sets so that the brightest parts of the video signal cannot exceed a certain level.
∫ General settings
Use the unit with the factory settings.
∫ Advanced settings
Set with the [SCENE FILE] menu → [WHITE CLIP SETTING].
[WHITE CLIP]: Switches the white clip function [ON]/[OFF].The [WHITE CLIP LEVEL] setting value is enabled when [ON].
[WHITE CLIP LEVEL]: Sets the white clip level.
A
[SAT]
B
[PHASE]
[]
R
Cy
Yl-R-R
Yl-Yl-R
Yl
Mg-Mg-B
Mg
R-Mg
Mg-B-B
G-Yl-Yl
G-G-Yl
G
Cy-G
B-Cy-Cy
B-B-Cy
B
[]