Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 5 Shooting — Audio input
- 125 -
Monitoring the audio
Audio recorded with the unit can be heard with a speaker or headphones.
Audio is not output from the speaker during shooting.
Setting the output audio
Sets the audio channel and the format to be output from the headphone terminal.
1
Select the [AUDIO] menu → [OUTPUT SETTINGS] → [AUDIO OUT].
2
Select the type of audio.
[CH1]: Outputs the signal for audio channel 1 as monaural.
[CH2]: Outputs the signal for audio channel 2 as monaural.
[CH1/2 STEREO]: Outputs the signals of the audio channel 1 and the audio channel 2 as stereo.
[CH1/2 MIX]: Mixes the signals of the audio channel 1 and the audio channel 2 and outputs as monaural.
@
NOTE
0 Adjust the volume of the headphones and built-in speaker as follows.
j During recording, volume is adjusted with the [ AUDIO MON] multi manual function. (l 141)
j During playback, volume is adjusted with the zoom lever (on the grip). (l 150)
Confirming audio input setting
The setting for the audio input can be confirmed in the AUDIO screen of the mode check.
For details, refer to “Mode check display” (l 162).