Operating Instructions

Chapter 5 Shooting — Special recording function
- 130 -
IR recording
A night time shooting using the IR light can be performed.
∫ Assigning [IR REC] to the USER button
1 Select the [CAMERA] menu → [USER SW] → [USER1] to [USER12] → [IR REC].
Set so enable/disable of the IR recording can be switched with a USER button.
∫ Performing IR recording
1 Press the USER button to which [IR REC] is assigned or touch the USER button icon.
The unit will enter the IR recording mode.
≥ The following happens in the IR recording mode:
j [IR] is displayed on the camera image screen.
j Iris is automatically adjusted.
2 Press the REC button.
IR recording is started.
@
NOTE
0 In the following case, this cannot be set.
j When using the face detection/tracking AE&AF function
0 This can also be set with the [CAMERA] menu → [SW MODE] → [IR REC].
0 It is recommended to use a tripod.
0 It takes longer to focus with Auto Focus in dark locations.
0 You can record a clear image by positioning the center area of the screen over the subject.
0 Focus values may not be displayed correctly in IR recording mode.
0 It is also possible to change the color in which images are recorded in [IR REC COLOR] (l 64)