Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 9 Network Connection — Streaming function
- 178 -
Starting streaming with an operation from the application software
1
Select the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [RECEIVER].
2
Specify the IP address and the path of the unit with the application software as follows, and start streaming.
rtsp://(IP address)/stream
@
NOTE
0 Perform an operation from the application software to stop streaming.
0 Only RTSP is available when starting streaming with an operation from the application software.
0 For details about the operations to start streaming from the application software, please see the manual for the application software.
0 Streaming stops when performing operations such as displaying the thumbnail screen or playing back clips on the unit.
0 Streaming may stop when the date/time is set while streaming.
Streaming with multicast
One streaming can be distributed to multiple receivers via supported router, etc., when the multicast function is used.
1
Select the [NETWORK] menu → [STREAMING] → [START TRIGGER] → [RECEIVER(MULTICAST)].
2
Select the [NETWORK] menu → [STREAMING], and specify [MULTICAST ADDRESS] and [MULTICAST PORT].
≥ Set [MULTICAST ADDRESS] within following range.
j IPv4: 224.0.1.0 to 239.255.255.254
≥ Set [MULTICAST PORT] within the range of 1024 to 50000.
3
Specify the address of the unit and start streaming with the application software.
@
NOTE
0 Multicast cannot start streaming with the operation on the unit.
[50.00Hz] [MOV] [1080-50.00p/422LongGOP 100M]
[1080-50.00p/422ALL-I 200M]
[1920
×
1080-50fps 24M]
[1920
×
1080-50fps 20M]
[1920
×
1080-50fps 16M]
[1280
×
720-50fps 14M]
[1280
×
720-50fps 8M]
[1280
×
720-50fps 3M]
[640
×
360-25fps 4M]
[640
×
360-25fps 1.5M]
[640
×
360-25fps 0.7M] (Factory setting)
[320
×
180-25fps 4M]
[320
×
180-25fps 1.5M]
[320
×
180-25fps 0.5M]
[MP4] [1080-50.00p/420LongGOP 50M]
[AVCHD] [1080-50.00p/AVCHD PS]
[MOV] [1080-50.00i/422LongGOP 50M]
[1080-50.00i/422ALL-I 100M]
[1080-25.00p/422LongGOP 50M]
[1080-25.00p/422ALL-I 100M]
[1920
×
1080-25fps 14M]
[1920
×
1080-25fps 6M]
[1920
×
1080-25fps 1M]
[1280
×
720-25fps 8M]
[1280
×
720-25fps 2M]
[1280
×
720-25fps 1M]
[640
×
360-25fps 4M]
[640
×
360-25fps 1.5M]
[640
×
360-25fps 0.7M] (Factory setting)
[320
×
180-25fps 4M]
[320
×
180-25fps 1.5M]
[320
×
180-25fps 0.5M]
[AVCHD] [1080-50.00i/AVCHD PH]
[1080-50.00i/AVCHD HA]
[AVCHD] [720-50.00p/AVCHD PM] [1280
×
720-50fps 14M]
[1280
×
720-50fps 8M]
[1280
×
720-50fps 3M]
[640
×
360-25fps 4M]
[640
×
360-25fps 1.5M]
[640
×
360-25fps 0.7M] (Factory setting)
[320
×
180-25fps 4M]
[320
×
180-25fps 1.5M]
[320
×
180-25fps 0.5M]
[SYSTEM] menu [NETWORK] menu
→
[STREAMING]
[FREQUENCY] [FILE FORMAT] [REC FORMAT] [STREAMING FORMAT]