Operating Instructions

Table Of Contents
Chapter 3 Preparation Power supply
- 25 -
Power supply
A battery or the supplied AC adaptor can be used as the power supply for the unit.
The unit is compatible to following batteries. (As of January 2020)
jAG-VBR59 (supplied/optional, supports quick charging)
jVW-VBD58 (optional)
AG-VBR59 supports quick charging. Use a battery charger (AG-BRD50: optional) to perform quick charging.
Attaching and removing the battery
¥Press the power button to turn off the unit. (l 34)
Attaching the battery
1
Push the battery against the battery mounting section on the main unit and
slide forward to attach.
Press in the battery until it clicks and gets locked.
A Battery mounting section
Removing the battery
Be sure to hold down the power button until the status indicator goes off. Then remove the
battery while supporting the unit to prevent it from dropping.
B Status indicator
Move the battery release lever in the direction indicated by
the arrow and remove the battery when unlocked.