Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 3 Preparation — Attaching accessories
- 28 -
Attaching accessories
Adjusting the grip belt
≥ Adjust the grip belt so that it fits the size of your hand.
≥ If the buckle is difficult to tighten, move the pad backward and tighten the buckle again.
1
Undo the button of the grip belt.
2
Open the buckle section.
3
Pull the end of the belt.
4
Do up the button of the grip belt.
Attaching the lens hood
Removing
1
While pressing the lens hood release button, turn the lens hood in the direction of the arrow to remove it.
Attaching
1
Insert the lens hood into the unit.
≥ Align the mounting marks on the lens hood and unit.
2
Turn the lens hood clockwise.
≥ Turn until the lens clicks and locks into place.
A Button
B Buckle
C Pad
A Lens hood release button
B Mounting mark
22
44
11
33