Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 3 Preparation — Attaching accessories
- 32 -
Attaching the external microphone
∫ Attaching an external microphone to the <INPUT 1>/<INPUT 2> terminals
When the handle unit ( supplied, optional) is attached to the unit, you can attach an external microphone such as a unidirectional
microphone AG-MC200G (optional) that is compatible with XLR terminals to the handle.
1
Open the microphone holder.
2
Attach the external microphone to the microphone holder, then close the buckle to
secure the external microphone.
Attach the fitting to the hook and close the buckle in the direction indicated by the arrow.
3
Connect the microphone cable to the <INPUT 1> terminal A.
4
Attach the microphone cable to the microphone cable clamp B.
5
Switch the <INPUT1> switch to match the microphone to be connected.
@
NOTE
0 When removing the microphone cable from the <INPUT 1> terminal, remove by lifting levers C.
X2000 X1500