Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 4 Operation — Basic operation of the menu
- 59 -
Operating the menu
Various settings are possible from the menu.
There are 2 methods of operation: a method to operate with the multidial, or a method to touch the LCD monitor.
When operating with the multidial
Operate the multidial on the main unit by turning it in vertical direction or pushing it.
1
Press the <MENU> button.
The menu is displayed.
2
Select the menu to set.
1) Turn the multidial to move the cursor to the menu to set.
2) Press the multidial.
The lower level menu is displayed.
≥ The confirmation screen is displayed depending on the menu.
≥ Perform the similar operation if there is next level.
≥ In some menus, a screen to set the numeric value is displayed in the camera image screen (Fig. 2).
≥ In some menus, a message is displayed if a menu cannot be executed.
≥ Press the <EXIT> button to return to one level higher.
3
Select the item to set.
1) Turn the multidial to move the cursor to the item to set.
2) Press the multidial.
A check mark is displayed at the left of the set item. (Fig. 1)
≥ Press the <EXIT> button to return to one level higher.
4
Press the <MENU> button to close the menu.
≥ Depending on the operating item, it will automatically return to the previous screen.
@
NOTE
0 In screens for setting numbers (Fig. 2), you can change the numbers rapidly by pressing the multidial down and holding it in the direction you want the
change to be made.
0 It is also possible to select/set operation icons, thumbnail displays, etc.
Fig. 1 Fig. 2
0