Operating Instructions
Table Of Contents
- Information for Your Safety
- Contents
- Chapter 1 Overview
- Chapter 2 Description of Parts
- Chapter 3 Preparation
- Chapter 4 Operation
- Chapter 5 Shooting
- Shooting
- Adjustable settings when shooting
- Adjusting the white and black balance
- Using the zoom function
- Using the built-in LED light
- Image quality adjustment
- Flash band compensation (FBC) function
- Super slow recording function
- Audio input
- Special recording function
- Convenient shooting functions
- Operation icon screen display
- Multi manual function
- Chapter 6 Playback
- Chapter 7 Output and Screen Display
- Chapter 8 Connecting to External Devices
- Chapter 9 Network Connection
- Chapter 10 Notes
- Chapter 11 Specification
- Firmware Update
- Firmware Ver. 1.4
Chapter 4 Operation — Menu settings
- 79 -
[PEAKING LEVEL]
Sets the intensity of the peaking display.
The items that can be set are as follows.
≥ [LOW], [MID], [HIGH]
(Factory setting: [MID])
[PEAKING COLOR]
Sets the color of the peaking display.
The items that can be set are as follows.
≥ [RED], [GREEN], [WHITE]
(Factory setting: [RED])
[DETAIL]
Sets the intensity of the contour for the video to make it easier to focus.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[DETAIL LEVEL]
Sets the intensity of the contours.
The items that can be set are as follows.
≥ [j3]…[i3]
(Factory setting: [0])
[DETAIL FREQ.]
Adjusts the frequency of the contour highlights.
The items that can be set are as follows.
≥ [HIGH], [LOW]
(Factory setting: [LOW])
[EI ASSIST]
[ZEBRA]
Sets whether to superimpose the zebra signal to the output.
(Factory setting: [OFF])
[ZEBRA1 DETECT]
Sets the detection level of zebra pattern 1.
The items that can be set are as follows.
≥ [50%]…[105%]
(Factory setting: [80%])
[ZEBRA2 DETECT]
Sets the detection level of zebra pattern 2.
The items that can be set are as follows.
≥ [50%]…[105%]
(Factory setting: [100%])
[ZEBRA2]
Switches enable/disable of zebra pattern 2.
The items that can be set are as follows.
≥ [ON], [OFF]
(Factory setting: [OFF])
[WFM MODE]
Sets the display of the waveform monitor. Displaying of the waveform and the vector can be switched.
(Factory setting: [WAVE])
[MOMENT] Press the USER button to which [ZEBRA] is assigned or touch the USER button icon to superimpose the zebra signal for
approximately 5 seconds.
[ON] Always superimposes the zebra signal. Press the USER button to which [ZEBRA] is assigned in the [ON] settings or touch the
USER button icon to set to [OFF].
[OFF] Does not superimpose the zebra signal. Press the USER button to which [ZEBRA] is assigned in the [OFF] settings or touch
the USER button icon to set to [ON].
[WAVE] Displays the waveform.
[VECTOR] Displays the vector.
[WAVE/VECTOR] Displays the waveform and the vector.
Each time you either press the USER button assigned to [WFM] or touch the USER button icon, the display switches in the
order waveform, vector, no display.