Operating Instructions

Network Connection Streaming function
281
Basic setting of the camera
Specifying the network settings
Specify the network settings. (ÎNetwork settings: 271)
Settings for the streaming function
1
Set the [SYSTEM] menu ¨ [FREQUENCY]/[REC FORMAT].
Set to the FHD (1920×1080) recording format.
2
Select the [NETWORK] menu ¨ [NETWORK FUNC] ¨ [STREAMING].
Streaming function is enabled.
3
Select the protocol with the [NETWORK] menu ¨ [STREAMING] ¨ [STREAMING
PROTOCOL].
4
In the [NETWORK] menu ¨ [STREAMING] ¨ [STREAMING FORMAT], set the format
when streaming.
For details about the setting items (ÎSettings when using the streaming function: 282)
5
Set the setting corresponding to the selected protocol. (ÎSetting for each protocol
and starting the streaming: 283)
The streaming function can be used when all of the following conditions are satisfied.
The [SCENE FILE] menu ¨ [VFR] ¨ [OFF] is set
The [SYSTEM] menu ¨ [SUPER SLOW] ¨ [OFF] is set
The menu has been set according to “Settings when using the streaming function” (This cannot be used when set to
UHD) (ÎSettings when using the streaming function: 282)
Interval recording, background recording, and dual codec recording
*
are disabled
* Available for setting when using .
(For the )
When the [SCENE FILE] menu ¨ [GAMMA MODE SEL] is set to [HLG], video is streamed after converting from high
dynamic range to standard dynamic range.
When the [SCENE FILE] menu ¨ [GAMMA MODE SEL] is set to [V-Log], video is streamed after converting from V-Log to
V-709.