Operating Instructions

Preparations before recording – Power supply
34
 Checking the remaining battery level
The remaining battery level can be checked with the power status display on the LCD monitor or the indicator on the supplied
battery.
Checking the remaining battery level with the LCD monitor
The battery status display will change as ¨ ¨ ¨ ¨ ¨ while the remaining battery level gets lower.
It will flash in red when the remaining battery level is zero.
Checking the remaining battery level with the battery
•
The remaining battery level can be checked with the indicator display by pressing the <CHECK> button on the battery when it
is not charging.
– The remaining battery level is a rough indication.
– The indicator will not illuminate even if the <CHECK> button is pressed when the remaining battery level is zero. Charge the
battery.
• The progress of the charging is notified by the flashing position of the indicator while the battery is charging.
Once the charging is completed, the indicator turns off.
1 Indicator
2 <CHECK> button
Display of the indicator
•
The color and illuminate/flashing status of the indicator indicated by the icon in the table are as follows.
– : Flashing in green
– : Illuminated in green
– : Off
• Display of the indicator is a rough indication. If the battery is attached to the unit or the battery charger, check the remaining
level on the device the battery is attached to. The remaining level may differ from the one displayed with the indicator on the
battery.
• The power status display may not be displayed depending on the setting in the menu.
• Repair or copy of the clip, or update of the firmware is not possible when it is flashing in red.
Indicator display
Remaining battery level/charging progress
When checking the remaining battery level Charging
0% to 25%
25 % to 50 %
50 % to 75 %
75 % to 100 %
ヤラユヤレ
ヤラユヤレ
ヒパパ
テ
パ
1 2