Operating Instructions

Menu – [RECORDING] menu
111
[DF/NDF]
Sets the count method for the time code generator.
Enabled only when the frame rate of the [SYSTEM] menu ¨ [REC FORMAT] is set to 59.94i/59.94p/29.97p.
(Factory setting: [DF])
[UB MODE]
Selects the user bits mode. User bits information is recorded in the clip.
(Factory setting: [USER])
[TC IN/OUT SEL]
Sets the input/output of the <TC IN/OUT> terminal.
(Factory setting: [TC IN])
[TC OUT REF]
Sets the output delay of the time code that is output from the <TC IN/OUT> terminal.
(Factory setting: [RECORDING])
[REC COUNTER]
Sets operation of the counter for recording.
(Factory setting: [TOTAL])
[TIME STAMP]
Selects whether to superimpose the date and time on videos that are shot. The display for the year, month, and day follows the
[DATE FORMAT] setting.
(Factory setting: [OFF])
[DF] Uses the drop frame mode.
[NDF] Uses the non-drop frame mode.
• The setting is fixed to [NDF] when the [RECORDING] menu ¨ [REC FUNCTION] ¨ [REC MODE] ¨ [INTERVAL] is set.
[FRAME RATE] Selects the image information (such as frame rate) of the camera.
[USER] Selects the user bits set in [UB PRESET].
[TIME] Selects the local time. (hh, mm, ss)
[DATE] Selects the local date and time. (YY, MM, DD, hh)
[TC] Records the time code value as user bits.
[CLIP NAME]
CAM INDEX (1 character) and CARD COUNT (3-digit number) are each recorded as
values converted to ASCII character codes.
Only enabled when the [SYSTEM] menu ¨ [FILE FORMAT] ¨ [MOV] or [MP4] is set.
[TC IN] Sets to the time code input.
[TC OUT] Sets to the time code output.
[RECORDING]
Outputs the recording time code without delay. This is used when performing
simultaneous recording on two cameras with the time code of this camera as the
master.
[SDI OUT]
Matches to output image from the <SDI OUT> terminal. Outputs without delay when
video is not output from the <SDI OUT> terminal.
[TOTAL] The count continues cumulatively until you press the <RESET> button.
[CLIP] Clears the counter value at the start of recording and counts the time for each recording.
[OFF] Does not superimpose the date and time.
[DATE] Superimposes only the date.
[TIME] Superimposes only the time.
[DATE&TIME] Superimposes the date and time.