Operating Instructions

Menu – [NETWORK] menu
114
[RTSP SETTING]
[LISTEN PORT]
Sets the port number to wait for the RTSP command.
(Factory setting: [554])
[MULTICAST]
Enables/disables the multicast function.
The items that can be selected are as follows.
≥ [ENABLE], [DISABLE]
(Factory setting: [DISABLE])
[MULTICAST ADDRESS]
Sets the address when using the streaming with the multicast.
(Factory setting: [239.192.0.20])
[MULTICAST PORT]
Sets the port number when using the streaming with the multicast.
(Factory setting: [37004])
[TTL/HOP LIMIT]
Sets the TTL/HOP limit value for the multicast.
The items that can be selected are as follows.
≥ [1]...[254]
(Factory setting: [16])
[LOAD (SD CARD)]
Loads the settings file from the memory card and reflects in the menu when [CONNECTION INFO.] is set to [MEMORY].
The items that can be selected are as follows.
≥[YES], [NO]
[SAVE (SD CARD)]
Encrypts and saves the information of the destination URL to the memory card.
The items that can be selected are as follows.
≥[YES], [NO]
[CLEAR (MEMORY)]
Clears the contents of the streaming setting set in the menu item.
The items that can be selected are as follows.
≥[YES], [NO]
[START]
Starts streaming.
The items that can be set are as follows.
≥[ON], [OFF]
(Factory setting: [OFF])
[WLAN PROPERTY]
Performs settings related to the wireless LAN.
[TYPE]
Sets the connection method to the wireless LAN.
(Factory setting: [DIRECT])
[DIRECT]
It can connect directly without using a wireless access point to a device equipped with
wireless LAN such as a tablet terminal.
[INFRA(SELECT)] Connects to the wireless access point. The access point is selected from the list.
[INFRA(MANUAL)] Connects to the wireless access point. Wireless access point is entered manually.