Operating Instructions

Menu – [NETWORK] menu
116
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
[SECONDARY DNS]
Sets the secondary DNS server.
(Factory setting: [0.0.0.0])
[LAN IPv4 SETTING]
[DHCP]
Sets whether to use the automatic acquisition through DHCP or to use the DHCP server function of the unit.
(Factory setting: [OFF])
[IP ADDRESS]
Sets the IP address.
(Factory setting: [192.168.0.1])
[SUBNET MASK]
Sets the subnet mask.
(Factory setting: [255.255.255.0])
[DEFAULT GATEWAY]
Sets the default gateway.
(Factory setting: [192.168.0.254])
[PRIMARY DNS]
Sets the primary DNS server.
(Factory setting: [0.0.0.0])
• If you do not use default gateway, set to [0.0.0.0].
• Cannot be set when [WLAN IPv4 SETTING] ¨ [DHCP] ¨ [CLIENT] is selected.
• Disables the setting for the default gateway when [WLAN PROPERTY] ¨ [TYPE] ¨ [DIRECT] is selected.
• Disables the setting for the primary DNS server when [WLAN PROPERTY] ¨ [TYPE] ¨ [DIRECT] is selected.
• Disables the setting for the secondary DNS server when [WLAN PROPERTY] ¨ [TYPE] ¨ [DIRECT] is selected.
[OFF] Does not use DHCP.
[CLIENT]
Performs automatic acquisition through DHCP. The address from 192.168.0.10 through 192.168.0.255 is
automatically assigned when the IP address cannot be acquired automatically within 1 minute.
[SERVER] Enables the DHCP server function of the unit.
• Cannot be set when [LAN IPv4 SETTING] ¨ [DHCP] ¨ [CLIENT] is selected.
• Cannot be set when [LAN IPv4 SETTING] ¨ [DHCP] ¨ [CLIENT] is selected.
• Cannot be set when [LAN IPv4 SETTING] ¨ [DHCP] ¨ [CLIENT] is selected.