Operating Instructions

Menu – [OTHERS] menu
124
[SERVICE MODE]
Switches the unit to the service mode.
You can also check software information (licenses) on a computer and other equipment. Confirm “LICENSE.TXT” for the
external drive recognized by a computer.
The items that can be selected are as follows.
≥[YES], [NO]
[INFORMATION]
[VERSION]
Displays the information of the unit.
[OPERATION TIME]
Displays the total operation time.
[UPDATE]
Updates the firmware.
Insert the memory card where the update file is saved into card slot 1.
The items that can be selected are as follows.
≥[YES], [NO]
[ECO MODE]
By setting [OTHERS] menu ¨ [ECO MODE] ¨ [BATTERY]/[AC]/[NETWORK], when there is no button operation or LCD
monitor touch operation performed for a certain time, the power turns off automatically.
• In the following case, [USB DEVICE] cannot be set:
– When the [NETWORK] menu ¨ [DEVICE SEL] is set to [USB TETHERING]
*1
or [USB-LAN]
*2
*1 Available for setting when using .
*2 Available for setting when using .
• When switched to service mode while using a battery, the LCD monitor turns off after approximately 5 seconds.
The LCD monitor turns on when you perform the following operations:
– Turn the multidial up or down
– Touch the LCD monitor
• To exit the service mode, do one of the following operations:
– Turn the power off
– Press the <EXIT> button
– Press the multidial
–Touch [ ]
[MODEL] Displays the product name of the unit.
[SERIAL NO.] Displays the serial number of the unit.
[VERSION] Displays the firmware version of the unit.
• In the following cases, even if [BATTERY], [AC], or [NETWORK] is set to [ON], the power will not automatically turn off.
– While a memory card is being accessed (during recording, during playback, while formatting the media, etc.)
– During pre-recording
– In card reader mode
• In the following case, even if [BATTERY] is set to [ON], the power will not automatically turn off.
– When using the AC adaptor
*
• In the following cases, the power will not automatically turn off.
– When connected to a network via wired LAN, wireless LAN or USB tethering
* The power turns off automatically if the [AC] eco mode functions.