Operating Instructions

- 116 -

Converting and playing back 2D images as 3D

You can connect this unit to 3D compatible TV, convert the scenes and still pictures recorded

in 2D (conventional image) to 3D and play back.

¬ Change the mode to and touch the play mode select icon. Then, select

the AVCHD scene or set to . (l 30)

Setting with the Touch Menu

1Touch .

≥ This is not displayed when playing back the iFrame scenes

or scenes saved in MP4.

2 Play back the scene or the still picture by

touching it.

≥ Setting for the [3D PLAYBACK] is not possible when [CONV. 2D TO 3D] is set to [ON].

≥ [CONV. 2D TO 3D] setting takes priority regardless of the [3D PLAYBACK] setting.

≥ Highlight Playback cannot be converted to 3D image.

≥ Scenes or still pictures converted to 3D images cannot be saved as 3D images.

Adjusting 3D effect of the 3D image

It is possible to adjust the disparity of the scenes and still pictures playing back in 3D for

better view.

1 Play back scenes or still pictures recorded in 3D.

2Touch .

≥ Playback disparity adjustment bar is displayed while

displaying in 3D.

3 Touch / to adjust settings.

≥ Playback disparity adjustment bar will disappear after

approx. 5 seconds without any touch operation.

≥ The setting is cancelled in following cases:

jIf you stop playback

jIf you turn the unit off

jIf you change the mode

: [VIDEO SETUP] or [PHOTO SETUP] # [CONV. 2D TO 3D] # [ON]

[ON]: Convert and play back the images recorded in 2D as 3D images. (3D

images are played back as 3D)

[OFF]: Recorded images are played back as it was recorded.

≥ Stop the operation when you feel fatigue, discomfort, or otherwise strange while

playing back or adjusting.

HC-X900&X900M&X800EP-VQT4D01_mst.book 116 ページ２０１２年１月１２日　木曜日　午前１０時４４分