Operating Instructions

- 151 -
∫ It is not a malfunction in following cases
Others
Troubleshooting
A clicking sound is heard
when the unit is shaken.
≥ This is the sound of the lens moving and is not a defect.
This sound will no longer be heard when the unit is turned
on and change the mode to or .
Object seems to be
warped.
≥ Object seems to be warped slightly when the object moves
across the image very fast, but this is because the unit is
using MOS for the image sensor. This is not a malfunction.
White round spots like
soap bubbles appear on
the recorded picture.
≥ If you take a picture with
the flash in a dark place or
indoors, white round spots
may appear on the picture
caused by the flash
reflecting of particles of
dust in the air. This is not a
malfunction.
A characteristic of this is that the number of round spots
and their position differ in every picture.
Power
Problem Check points
This unit cannot be
turned on.
This unit does not stay
on long enough.
Battery runs down
quickly.
≥ Charge the battery again to ensure it is sufficiently
charged. (l 11)
≥ In cold places, the battery using time becomes shorter.
≥ The battery has a limited life. If the operating time is still
too short even after the battery is fully charged, the
battery has worn out and needs to be replaced.
This unit is turned off
automatically.
≥ If the unit turns off when you turn off the power to the TV
using the TV remote control, the VIERA Link is at work. If
you are not using the VIERA Link, set [VIERA Link] to
[OFF]. (l 107)
≥ When this unit is connected to a DVD burner to copy or
play back images (a disc is being accessed), the unit
turns off automatically if the USB Connection Cable is
removed.
HC-X900&X900M&X800EP-VQT4D01_mst.book 151 ページ ２０１２年１月１２日 木曜日 午前１０時４４分