Operating Instructions

- 161 -
When disposing of or giving away the SD
card, note that:
≥ Formatting and deletion of this unit or
computer only changes the file
management information and does not
completely delete the data in the SD card.
≥ It is recommended that the SD card is
physically destroyed or the SD card is
physically formatted using this unit when
disposing of or giving away the SD card.
//
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT CARD] # [YES]
from the menu, and then press and hold
the recording start/stop button on the
screen below for about 3 seconds. When
the SD card data deletion screen appears,
select [YES], and then follow the on-
screen instructions.
To physically format the SD card, connect
the unit via the AC adaptor, select
[SETUP] # [FORMAT MEDIA] # [SD
CARD] from the menu, and then press
and hold the recording start/stop button on
the screen below for about 3 seconds.
When the SD card data deletion screen
appears, select [YES], and then follow the
on-screen instructions.
≥ The customer is responsible for the
management of the data in the SD card.
≥ When the LCD monitor gets dirty, wipe it
with a soft cloth, such as eye glass
cleaner.
≥ Do not touch the LCD monitor with your
finger nails, or rub or press with strong
force.
≥ It may become hard to see or hard to
recognise the touch when the LCD
protection sheet is affixed.
≥ In a place with drastic temperature
changes, condensation may form on the
LCD monitor. Wipe it with a soft cloth,
such as eye glass cleaner.
≥ When the unit has become very cold, for
example due to storage in a cold area, its
LCD monitor will be slightly darker than
usual immediately after the unit is turned
on. The normal brightness will be restored
when the unit’s internal temperature rises.
//
About the SD card
HC-X900
HC-X909
HC-X800
HC-X900M
LCD monitor/viewfinder
Extremely high precision technology is
employed to produce the LCD Monitor
screen featuring a total of approximately
1,152,000 dots. The result is more than
99.99% effective dots with a mere 0.01%
of the dots inactive or always lit.
However, this is not a malfunction and
does not affect the recorded picture.
Extremely high precision technology is
employed to produce the viewfinder
screen featuring a total of approximately
263,000 dots equivalent. The result is
more than 99.99% effective dots with a
mere 0.01% of the dots inactive or always
lit. However, this is not a malfunction and
does not affect the recorded picture.
HC-X900
HC-X909
HC-X900M
HC-X900&X900M&X800EP-VQT4D01_mst.book 161 ページ ２０１２年１月１２日 木曜日 午前１０時４４分