Operating Instructions

- 19 -
The viewfinder is turned off and the LCD monitor is turned on when the LCD monitor is
opened.
The viewfinder is turned on when the LCD monitor is closed and the viewfinder is extended.
≥ Live image recording or 3D recordings can be viewed in 3D on the LCD monitor. (l 80,
109)
∫ To adjust the image in the viewfinder
Adjust to make the image clear by
rotating the eyepiece corrector dial.
≥ Extend the viewfinder and close the LCD monitor
to turn on the viewfinder.
You can operate by directly touching the LCD monitor (touch screen) with your finger.
∫ Touch
Touch and release the touch screen to select icon or
picture.
≥ Touch the centre of the icon.
≥ Touching the touch screen will not operate while you are
touching another part of the touch screen.
∫ Slide while touching
Move your finger while pressing on the touch screen.
Preparation
Preparation of the LCD monitor/
Viewfinder
[HC-X900/HC-X909/HC-X900M]
There are differences in the way that different people experience 3D images. Check
from a position directly in front of and at around 25 cm from the LCD monitor,
where you can easily see picture.
Preparation
How to use the touch screen
HC-X900&X900M&X800EP-VQT4D01_mst.book 19 ページ ２０１２年１月１２日 木曜日 午前１０時４４分