Operating Instructions

- 38 -

Please refer to page 43.

The recording lamp lights up during recording and flashes when the unit receives a signal

from the remote control or when the Self-timer is counting down.

The recording lamp lights up during recording and flashes when the Self-timer is counting

down.

When this is set to [OFF], it does not light during recording.

Touch screen operation, starting and stopping of recording and unit on/off can be confirmed

with this sound.

2 Beeps for 4 times

When an error occurs. Check the sentence displayed on the screen. (l 149)

You can change the operation icons displayed in the Touch Menu.

≥ This function’s default settings are (Fade), (PRE-REC) and (Backlight

Compensation) for Motion Picture Recording Mode, and (Built-in flash),

(Self-timer) and (Backlight Compensation) for Still Picture Recording Mode.

1 Touch [SELECT OPERATION ICONS].

2 Touch the operation icon you would like to change to cancel the setting.

3 Touch the operation icon to be set.

≥ Name of the function is displayed by touching and holding on the operation icon.

≥ To cancel, touch the operation icon again.

4 Touch [ENTER].

≥ For details about function of each operation icon, refer to page 51.

[REMOTE CONTROL]

[ON]/[OFF]

[REC LAMP]

[ON]/[OFF]

[ALERT SOUND]

/ /[OFF]

(Volume low)/ (Volume high)

[SELECT OPERATION

ICONS]

HC-X900

HC-X909

HC-X900M

HC-X900

HC-X909

HC-X900M

HC-X800

HC-X900&X900M&X800EP-VQT4D01_mst.book 38 ページ２０１２年１月１２日　木曜日　午前１０時４４分