Operating Instructions

- 59 -
Switch the picture quality and recording format of the motion pictures to be recorded.
*1 Recording will have higher quality in the order of [HA], [HG], [HX] and [HE].
*2 It can record with highest quality image in this unit.
*3 iFrame is a format suitable for Mac (iMovie’11). It is recommended for when using a Mac.
*4 This is displayed only when the 3D Conversion Lens (optional) is attached.
≥ Recordable time using the battery (l 12)
≥ This function’s default setting is [HG] mode.
≥ Please refer to page 164 about approximate recordable time.
≥ When the unit is moved a lot or moved quickly, or when a fast-moving subject is recorded
(particularly when recording in [HE] mode), mosaic-type noise may appear at playback.
A scene that moves slowly for long period of time is recorded frame by frame with an interval,
and is recorded as a short time motion picture.
A frame is recorded with a set recording interval.
25 frames will make up motion picture of 1 second.
≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 58)
≥ Set [REC MODE] to [HA], [HG], [HX] or [HE].
≥ Switch to Manual Mode when the Interval Recording is set.
≥ appears on the screen.
≥ After recording, the setting of Interval Recording is cancelled.
≥ Audio cannot be recorded.
[REC MODE]
: [RECORD SETUP] # [REC MODE] # desired setting
≥ It is possible to set from the quick menu. (l 33)
[HA]/[HG]/[HX]/[HE]
*1
: Set the recording mode to 1080/50i.
[1080/50p]
*2
: Set the recording mode to 1080/50p.
[iFrame]
*3
: Set the recording mode to iFrame.
[AVCHD 3D]
*4
: Set the recording format to AVCHD 3D format, which can
record in 3D full high definition image.
[SbS 3D]
*4
: Set the recording format to side-by-side format (2 screen
structure), which can record in 3D image.
[TIME LAPSE REC]
: [RECORD SETUP] # [TIME LAPSE REC] # desired setting
[OFF]:
Cancel the setting.
[1 SECOND]/[10 SECONDS]/[30 SECONDS]/[1 MINUTE]/[2 MINUTES]:
Change the recording interval.
MENU
MENU
HC-X900&X900M&X800EP-VQT4D01_mst.book 59 ページ ２０１２年１月１２日 木曜日 午前１０時４４分