Operating Instructions

- 64 -

∫ Prioritised face framing

Prioritised face framing is displayed as orange frames. Focus and adjustment of brightness

will be performed against the prioritised face framing.

≥ Prioritised face framing is only displayed with Portrait Mode in the Intelligent Auto Mode.

≥ The white frame is for face detection only.

≥ Focus will be set to prioritised face framing when the button is pressed halfway when

recording still pictures. Prioritised face framing will turn to green when the focus is set.

You can record bright pictures even in dark places by slowing the shutter speed.

≥ Switch to Manual Mode. (l 74)

≥ The shutter speed is set to 1/25 or more depending on the surrounding brightness.

≥ This function cannot be used when using the 3D Conversion Lens (optional).

≥ This function cannot be used in Still Picture Recording Mode.

≥ When the shutter speed becomes 1/25, the screen may be seen as if frames are missed

and afterimages may appear.

This auto slow shutter function is only used with the 3D Conversion Lens (optional).

≥ Switch to Manual Mode. (l 74)

≥ For details, refer to [AUTO SLOW SHTR (2D)].

≥ This function’s default setting is [ON].

≥ When a 3D Conversion Lens is used, the recording scene will become darker. We

recommend setting this function to [ON].

If the unit continues to be tilted upside down from the normal horizontal position while

recording motion pictures, it is automatically put into recording pause.

≥ The AGS function may activate and cause the unit to pause the recording if you are

recording a subject right above or right below you.

[AUTO SLOW SHTR (2D)]

: [RECORD SETUP] # [AUTO SLOW SHTR (2D)] # [ON]

[AUTO SLOW SHTR (3D)]

: [RECORD SETUP] # [AUTO SLOW SHTR (3D)] # [ON]

[AGS]

: [RECORD SETUP] # [AGS] # [ON]

HC-X900&X900M&X800EP-VQT4D01_mst.book 64 ページ２０１２年１月１２日　木曜日　午前１０時４４分