Operating Instructions

- 67 -

When recording, the input level from the built-in microphones and the external microphone

terminal can be adjusted.

When recording, the input level from the built-in microphones can be adjusted.

1 Select the menu.

≥ It is possible to select the setting from the quick menu in Manual Mode. (l 33) The

microphone level returns to the setting adjusted previously, and it cannot be set from the

quick menu.

2 (When [SETr ]/[SET] is selected)

Touch / to adjust.

≥ Touch to activate/disactivate AGC. When AGC is activated, the icon is surrounded by

yellow and the amount of sound distortion can be reduced. When AGC is disactivated,

natural recording can be performed.

≥ Adjust the microphone input level so that the last 2 bars of the gain value are not red.

(Otherwise, the sound is distorted.) Select a lower setting for microphone input level.

3 Touch [ENTER] to set the microphone input level and then touch [EXIT].

≥ (Microphone input level meter) appears on the screen.

[MIC LEVEL]

: [RECORD SETUP] # [MIC LEVEL] # desired setting

[AUTO]: AGC is activated, and the recording level is adjusted

automatically.

[SETr ]/[SET]: The desired recording level can be set.

A Centre

B Front left

C Back left

D Front right

E Back right

F Microphone input level

G Left

H Right

I Microphone input level

HC-X900

HC-X909

HC-X900M

HC-X800

HC-X900

HC-X909

HC-X900M

HC-X800







HC-X900&X900M&X800EP-VQT4D01_mst.book 67 ページ２０１２年１月１２日　木曜日　午前１０時４４分