Operating Instructions

- 68 -

≥ //

When [MIC SETUP] is [ZOOM MIC], the volume will be different depending on the zoom

rate.

When [ZOOM MIC] is [ON], the volume will be different depending on the zoom rate.

≥ //

When [MIC SETUP] is set to [STEREO MIC] or external microphone input is used, the

sound is stereo (2 ch) and only the front-left and front-right input level meters function.

≥ The microphone input level meter shows the largest volume for the microphones.

≥ You cannot record with the audio completely muted.

Change the lower setting of the built-in microphone according to your choice.

≥ Switch to Manual Mode. (l 74)

≥ Normally set to [0dB].

≥ Select [+3dB] or [+6dB] to get strong power feeling at bass level.

Adjust the quality of the image while recording.

Adjust by outputting to a TV while adjusting the quality of the image.

≥ This setting is retained when you change between Motion Picture Recording Mode

and Still Picture Recording Mode.

≥ Switch to Manual Mode. (l 74)

1 Select the menu.

2 Touch the desired setting items.

3 Touch / to adjust settings.

4 Touch [ENTER].

≥ Touch [EXIT] to complete the settings.

≥ appears on the screen.

[BASS SETTING]

: [RECORD SETUP] # [BASS SETTING] # desired setting

[0dB]/[+3dB]/[+6dB]/[LOWCUT]

[PICTURE ADJUST]

: [RECORD SETUP] # [PICTURE ADJUST]

[SHARPNESS]: Sharpness of the edge

[COLOUR]: Depth of the colour of the image

[EXPOSURE]: Brightness of the image

[WB ADJUST]: Picture colour balance

HC-X900

HC-X909

HC-X900M

HC-X800

HC-X900

HC-X909

HC-X900M

HC-X900

HC-X909

HC-X900M

HC-X900&X900M&X800EP-VQT4D01_mst.book 68 ページ２０１２年１月１２日　木曜日　午前１０時４４分