Operating Instructions

- 98 -

Deleting part of a scene (AVCHD)

Unnecessary part of an AVCHD scene can be deleted.

The deleted scenes cannot be restored.

≥ Change the mode to and touch the play mode select icon. Then, select the

AVCHD scene. (l 30)

1 Select the menu.

2 Touch the scene with a part to delete.

3 Slide while touching the two top and bottom

section selection buttons and set the

section to delete

≥ It is convenient to use Slow-motion Playback and Frame-

by-frame Playback. (l 84)

4 Touch [ENTER].

5 Touch [YES] and confirm (play back) the edited scene.

≥ When [NO] is touched, a confirmation message appears. Proceed to Step 7.

6 Stop the playback.

≥ A confirmation message appears.

7 Touch [ENTER].

≥ To continue deleting parts from other scenes, repeat Steps 2-7.

≥ Deleting of part cannot be performed when there are 99 scenes in a single date.

≥ It may not be possible to delete part of a scene with a short recording time.

≥ The scene will be divided into two scenes when middle part of a scene is deleted.

≥

The relay information is deleted when part of a scene that was relay recorded is deleted,

making it impossible to perform [RELAY SCENE COMBINE]. (l 102)

: [EDIT SCENE] # [SECTION DELETE

]

0h00m15s

HC-X900M

HC-X900&X900M&X800EP-VQT4D01_mst.book 98 ページ２０１２年１月１２日　木曜日　午前１０時４４分