Operating Instructions

- 149 -
Touch .
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
∫ To start the live broadcast
Touch .
≥ If you press the start recording button, you can simultaneously
record the broadcast to this unit.
≥ / / will disappear when no touch function is
performed for a specific period of time. To display them again,
touch the screen.
∫ To stop the live broadcast
Touch .
≥ When (grey) is displayed, unsent data is present.
Wait until the unsent data is sent and is displayed.
To exit the Live Cast Mode:
Touch [EXIT] or press Wi-Fi button.
≥ A message is displayed. Touch [YES] to exit.
∫ About the screen indications in the Live Cast Mode
≥ Recording is performed in Intelligent Auto Mode.
≥ If you close the LCD monitor face down while recording, the LCD monitor of this unit will not
display.
≥ Image content may be leaked to third parties depending on the USTREAM image publication
method settings. Set the publication range and Password using USTREAM if required.
≥ Be sure to pay special attention to the privacy, the likeness rights, etc. of the subject when
you use this function. Use at your own risk.
R 1h20mR 1h20mR 1h20m

A [EXIT]
/ Live Broadcast indication
Line quality (l 150)
1h23m Elapsed time of the live broadcast
12fps Frame rate (l 150)
Number of people watching the live
broadcast
≥ Up to 9999 viewers can be
indicated. The indication does not
appear when the number is 0.
E-mail delivery setting

R 1h20m
R 1h20m
R 1h20m
A [EXIT]