Operating Instructions

- 161 -
5 (When recording motion pictures)
Press the recording start/stop button to start recording. (l 23)
≥ Start recording after removing the Lens front cap.
≥ [REC MODE] during recording the 3D will be [AVCHD 3D] or [SbS 3D]. (l 71)
(When recording still pictures)
Press the button to record still pictures. (l 25)
≥ appears on the screen.
≥
It is possible to record still pictures while recording motion pictures. (Simultaneous recording)
≥ The number of recording pixels are (1920k1080). (l 84)
≥ Use of a tripod is recommended for recording with a stable picture.
≥ You cannot record 3D images while using the Wi-Fi function even if you attach the 3D Conversion
Lens.
≥ [ECONOMY (BATT)]/[ECONOMY (AC)] will not work while you adjust the 3D Conversion Lens
attachment position.
≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW SHTR
(3D)]. (l 78)
≥ While 3D recording if moving the unit fast, the message is more likely to appear.
≥ The LCD monitor on this unit will not display in 3D.
≥ If the unit is turned on with the lens cap attached in the shade etc., the screen may appear to be
blue. In such a case, remove the lens cap to return the screen to normal.
To ensure that the 3D image can be safely viewed, pay attention to the following points
when recording.
≥ Where possible, record with the unit in a horizontal state.
≥ Do not get too close to the subject. (Record from a distance of at least 1.2 m.)
≥ When moving the unit as you record, move it slowly.
≥
Try to hold the unit as steady as possible when recording while riding in a vehicle or walking.
3D
2.1
M