Operating Instructions

- 38 -

The recording lamp lights up during recording and flashes when the Self-timer is counting down.

When this is set to [OFF], it does not light during recording.

Touch screen operation, starting and stopping of recording and unit on/off can be confirmed with this

sound.

When [OFF] is selected, the sound is not output at the start/end of recording, etc.

2 Beeps for 4 times

When an error occurs, follow the instructions displayed on the screen. (l 183)

You can change the operation icons to display in the Touch Menu. (l 63)

≥ This function’s default settings are (Fade), (PRE-REC) and (Backlight

Compensation) for Motion Picture Recording Mode, and (Built-in flash),

(Self-timer) and (Backlight Compensation) for Still Picture Recording Mode.

1 Select the menu.

2 Touch the operation icon you would like to change to cancel the setting.

3 Touch the operation icon to be set.

≥ Name of the function is displayed by touching and holding on the operation icon.

≥ To cancel, touch the operation icon again.

4 Touch [ENTER].

[REC LAMP]

: [SETUP] # [REC LAMP] # [ON]

[ALERT SOUND]

: [SETUP] # [ALERT SOUND] # desired setting

(Volume low)/ (Volume high)/[OFF]

[SELECT OPERATION ICONS]

: [SETUP] # [SELECT OPERATION ICONS]