Operating Instructions

- 41 -
Set the file number of the iFrame and still picture recorded next to 0001.
≥ Folder number is updated and file number will start from 0001. (l 177)
≥ To reset the folder number, format the SD card and built-in memory, and then perform
[NUMBER RESET].
Please be aware that if a medium is formatted, then all the data recorded on the medium will be
erased and cannot be restored. Back up important data on a PC, DVD disc etc. (l 168)
*1 only
*2 Displayed when connecting a USB HDD. (l 118)
≥ //
Media selection screen is not displayed when the USB HDD is not connected. Touch [YES].
≥ When formatting is complete, touch [EXIT] to exit the message screen.
≥ Perform a physical formatting of the SD card when the SD card is to be disposed/ transferred.
(l 195)
≥
Perform a physical formatting of the built-in memory when this unit is to be disposed/ transferred.
(l 192)
≥ Do not turn this unit off or remove the SD card, while formatting. Do not expose the unit to
vibrations or shock.
[NUMBER RESET]
: [SETUP] # [NUMBER RESET]
[FORMAT MEDIA]
: [SETUP] # [FORMAT MEDIA] # desired media
[Built-inMemory]
*1
/[SD CARD]/[HDD]
*2
Use this unit to format media.
Formatting built-in memory is only available with this unit.
Do not format an SD card using any other equipment such as a PC. The card may not be
used on this unit.
MENU
MENU
HC-X920M
HC-X920
HC-X929
HC-X910
HC-X920M