Operating Instructions

- 58 -
Recording with Manual Focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Press the CAMERA FUNCTION button to switch to Manual Mode. (l 55)
≥ For how to perform the settings when using the viewfinder, refer to page 55.
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu.
≥ Touch to display the Manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to Manual Focus.
≥ MF appears on the screen.
4 Adjust the focus by rotating the multi manual
ring.
The in-focus area is displayed in blue. The normal screen
returns approximately 2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue area is not
displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or press the
intelligent auto button again.
≥ When adjusting the focus, you cannot zoom using the multi manual ring.
≥ The blue display does not appear on the images actually recorded.
: [RECORD SETUP] # [MF ASSIST] # [ON]
≥ It is possible to set from the quick menu. (l 33)

MENU
MNL
A Part displayed in blue