Operating Instructions

- 68 -
This is for recording still pictures using the timer.
The icon changes each time it is touched.
Ø10 (Records after 10 seconds) # Ø2 (Records after 2 seconds) # setting cancelled
≥ When the button is pressed, a still picture is recorded after the Ø10 or Ø2 display and the
recording lamp flashes for the time which has been set. After recording, the Self-timer is
cancelled.
≥ In Auto Focus Mode, if the button is pressed halfway once and then fully, the lens focuses
on the subject when the button is pressed halfway. If the button is pressed fully all at once,
the lens focuses on the subject just before recording.
To stop the timer midway through
Touch [CANCEL].
≥ Setting the Self-timer to Ø2 is a good way to prevent image shake when the button is
pressed while using a tripod etc.
This brightens dark areas so the image can be recorded clearly.
≥ If there are extremely dark parts or the brightness is insufficient, the effect may not be clear.
This makes the image brighter to prevent darkening of a backlit subject.
A more impressive image can be obtained by focusing on the object only in close-up and
shading off the background.
≥ The unit can focus on the subject at a distance of approx. 95 cm.
≥ When the Tele Macro is set with the zoom magnification less than 12k, it will automatically be set
to 12k.
≥ Tele Macro function is cancelled when the zoom magnification becomes lower than 12 k .
Self-timer
Intelligent Exposure
Backlight Compensation
Tele Macro