Operating Instructions

- 72 -

Use this function to record an image with vivid colour, like an image on a movie film.

≥ Switch to Manual Mode. (l 55)

≥ Set [ZOOM MODE] to [Opt.Zoom 12k]. (l 71)

≥ Set [REC MODE] to [PH], [HA] or [HG]. (l 71)

≥ The images may not appear smooth.

It is possible to continuously record motion picture to an SD card when there is no space available

in the built-in memory. (It allows you to record only to SD card from built-in memory.)

≥ Set [MEDIA SELECT] to [Built-inMemory]. (l 22)

≥ Set [REC MODE] to [PH], [HA], [HG], [HE] or [1080/50p]. (l 71)

≥ Insert an SD card.

≥ is displayed on the screen. will disappear when space in the built-in memory is gone

and the recording to the SD card starts.

≥ Relay Recording can only be performed once.

≥ Combine the scenes that were relay-recorded using the [RELAY SCENE COMBINE] into

the SD card. (l 108, 115)

≥ Once you have performed [RELAY SCENE COMBINE], you can use the Relay Recording

function again. If the [RELAY REC] is set to [ON] without performing the [RELAY SCENE

COMBINE], a message is displayed. You will be able to perform Relay Recording by touching

[YES], but you will not be able to perform the [RELAY SCENE COMBINE] after that.

≥ Still pictures are recorded to the SD card after Relay Recording.

≥ is displayed on the thumbnail display during the playback of the scene that was relay-

recorded on the built-in memory.

[DIGITAL CINEMA]

: [RECORD SETUP] # [DIGITAL CINEMA] # [ON]

[RELAY REC]

: [RECORD SETUP] # [RELAY REC] # [ON]

HC-X920M