Operating Instructions

- 79 -

Message is displayed when this unit is moved rapidly.

When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.

≥ Message will not appear while pausing the recording. (Message will appear even if it is pausing

the recording if [DEMO MODE] is set to [ON].)

This will reduce the wind noise coming into the built-in microphones while maintaining the realism.

≥ Switch to Manual Mode. (l 55)

≥ When [Strong] is set, you can check how effectively the wind noise is reduced with the icon

displayed on the screen. In descending order of the strength of the reduction effect, / /

/ is displayed.

≥ When [Normal] is set, will be displayed on the screen.

≥ This function’s default setting is [Normal].

≥ When switching to Intelligent Auto Mode or Intelligent Auto Plus Mode, [Wind Noise Canceller] is

set to [Strong], and the setting cannot be changed.

≥ You may not see the full effect depending on the recording conditions.

≥ If wind sound cannot be reduced with the Wind Noise Canceller function alone, set [BASS

SETTING] to [LOWCUT]. (l 82)

≥ This function cannot be set when using an external microphone.

This function reduces the low-pitched sound when using an external microphone.

≥ Switch to Manual Mode. (l 55)

≥ This function can be set only when using an external microphone.

[SHOOTING GUIDE]

: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]

[Wind Noise Canceller]

: [RECORD SETUP] # [Wind Noise Canceller] # desired setting

[Strong]: When a strong wind is detected, this option effectively reduces the

wind noise by minimizing the low-pitched sound.

[Normal]: This option extracts and reduces only the wind noise without

deteriorating the sound quality.

[OFF] Cancel the setting.

[LOWCUT]

: [RECORD SETUP] # [LOWCUT] # [ON]