Operating Instructions

- 37 -
The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set
to or .
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick Power On Mode, the zoom magnification becomes approx. 1k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened or the
viewfinder is extended.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥ / /
Quick Start will not work if there is no SD card inserted.
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1 Select the menu.
2 Close the LCD monitor and retract the
viewfinder.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend
the viewfinder.
The status indicator A lights red and the unit
is put into recording pause.
≥ Quick Start Standby Mode is cancelled if
j about 5 minutes elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ If [ECONOMY (BATT)] (l 36)/[ECONOMY (AC)] (l 36) is set to [ON] and the unit automatically
goes into Quick Start Standby Mode, close the LCD monitor and viewfinder and then open the
LCD monitor or extend the viewfinder again.
≥ Turn the unit off using the power button.
[QUICK POWER ON]
: [SETUP] # [QUICK POWER ON] # [ON]
[QUICK START]
: [SETUP] # [QUICK START] # [ON]
MENU
HC-X920
HC-X929
HC-X910
HC-X920M
MENU

- 37 -
The unit is put into recording pause approx. 1 second when the unit is turned on with the mode set
to or .
≥ Depending on the recording conditions, start time may be longer than 1 second.
≥ In the Quick Power On Mode, the zoom magnification becomes approx. 1k.
This unit is put into recording pause approx. 0.6 seconds after the LCD monitor is reopened or the
viewfinder is extended.
≥ When in Quick Start Standby Mode about 70% of the power used in recording pause mode
is being consumed, so the recording time will be reduced.
≥ / /
Quick Start will not work if there is no SD card inserted.
Quick Start will not work if the [SD CARD] is selected in the [MEDIA SELECT], even if there is no
SD card inserted.
1 Select the menu.
2 Close the LCD monitor and retract the
viewfinder.
The status indicator A flashes green and the unit goes into
Quick Start Standby Mode.
≥ The lens cover does not close.
3 Open the LCD monitor or extend
the viewfinder.
The status indicator A lights red and the unit
is put into recording pause.
≥ Quick Start Standby Mode is cancelled if
j about 5 minutes elapsed
j mode is set to
≥ Depending on the recording conditions and menu settings, time for Quick Start may be longer
than 0.6 seconds.
≥ It may take some time for Automatic White Balance to adjust.
≥ In the Quick Start Mode, the zoom magnification becomes approx. 1k.
≥ If [ECONOMY (BATT)] (l 36)/[ECONOMY (AC)] (l 36) is set to [ON] and the unit automatically
goes into Quick Start Standby Mode, close the LCD monitor and viewfinder and then open the
LCD monitor or extend the viewfinder again.
≥ Turn the unit off using the power button.
[QUICK POWER ON]
: [SETUP] # [QUICK POWER ON] # [ON]
[QUICK START]
: [SETUP] # [QUICK START] # [ON]
MENU
HC-X920
HC-X929
HC-X910
HC-X920M
MENU

- 37 -
[QUICK POWER ON] (Brzo uključivanje)
Ovaj uređaj se kod snimanja zaustavlja na otprilike 1 sekundu kod uključivanja, dok je način rada
postavljen na ili .
: [SETUP] (Postavljanje)→ [QUICK POWER ON] (Brzo uključivanje) → [ON] (Uklj.)
● Ovisno o uvjetima snimanja, vrijeme početka reprodukcije moglo bi biti duže od 1 sekunde.
● U načinu rada za brzo uključivanje, uvećanje zuma postaje približno 1×.
[QUICK START] (Brzi početak)
Uređaj pauzira snimanje približno 0,6 sekundi nakon što se LCD-monitor ponovno otvori ili se
tražilo izvuče.
● Kod stanja čekanja za brzi početak oko 70 % snage troši se na privremeno zaustavljanje
snimanja, stoga će vrijeme snimanja biti skraćeno.
● / /
Vrijeme pokretanja neće biti kraće ako nije umetnuta SD-kartica.
Vrijeme pokretanja neće biti kraće ako je u [MEDIA SELECT] (Odabir medija) odabrana funkcija
[SD CARD], čak ni ako SD-kartica nije umetnuta.
1 Odaberite izbornik.
: [SETUP] (Postavljanje)→ [QUICK START] (Brzi početak)→ [ON] (Uklj.)
2 Zatvorite LCD-monitor ili uvucite tražilo.
Pokazatelj statusa treperi zeleno, a uređaj prelazi u
stanje čekanja za brzi početak.
● Poklopac objektiva se ne zatvara.
3 Otvorite LCD-monitor ili izvucite tražilo.
Pokazatelj statusa svijetli crveno, a uređaj se prebacuje
na privremeno zaustavljanje snimanja.
● Stanje čekanja brzog početka poništava se ako:
– prođe otprilike 5 minuta
– postavite način rada na
● Ovisno o uvjetima snimanja i postavkama izbornika, vrijeme brzog početka može biti duže od
0,6 sekundi.
● Može biti potrebno određeno vrijeme za podešavanje automatskog balansa bijele boje.
● U načinu za brzo uključivanje uređaja uvećanje zuma postaje približno 1x.
● Ako je funkcija [ECONOMY (BATT)] (→ 36)/[ECONOMY (AC)] (→ 36) postavljena na [ON]
(Uklj.), a uređaj automatski prelazi u stanje čekanja za brzi početak, zatvorite LCD-monitor i
tražilo te nakon toga ponovno otvorite LCD-monitor ili izvucite tražilo.
● Isključite uređaj pomoću prekidača.
A
A