Operating Instructions

- 58 -
Recording with Manual Focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Press the CAMERA FUNCTION button to switch to Manual Mode. (l 55)
≥ For how to perform the settings when using the viewfinder, refer to page 55.
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu.
≥ Touch to display the Manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to Manual Focus.
≥ MF appears on the screen.
4 Adjust the focus by rotating the multi manual
ring.
The in-focus area is displayed in blue. The normal screen
returns approximately 2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue area is not
displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or press the
intelligent auto button again.
≥ When adjusting the focus, you cannot zoom using the multi manual ring.
≥ The blue display does not appear on the images actually recorded.
: [RECORD SETUP] # [MF ASSIST] # [ON]
≥ It is possible to set from the quick menu. (l 33)

MENU
MNL
A Part displayed in blue
- 58 -
Recording with Manual Focus
Perform focus adjustments using the multi manual ring.
If auto focusing is difficult due to the conditions, then use Manual Focus.
≥ Press the CAMERA FUNCTION button to switch to Manual Mode. (l 55)
≥ For how to perform the settings when using the viewfinder, refer to page 55.
A Rotate the multi manual ring to adjust the focus.
1 (When MF assist function is used)
Select the menu.
≥ Touch to display the Manual icon.
2 Touch [FOCUS].
3 Touch [MF] to change to Manual Focus.
≥ MF appears on the screen.
4 Adjust the focus by rotating the multi manual
ring.
The in-focus area is displayed in blue. The normal screen
returns approximately 2 seconds after you finish bringing the
subject into focus.
≥ When [MF ASSIST] is [OFF], the blue area is not
displayed.
≥ To restore Auto Focus, touch [AF] in Step 3 or press the
intelligent auto button again.
≥ When adjusting the focus, you cannot zoom using the multi manual ring.
≥ The blue display does not appear on the images actually recorded.
: [RECORD SETUP] # [MF ASSIST] # [ON]
≥ It is possible to set from the quick menu. (l 33)

MENU
MNL
A Part displayed in blue
- 58 -
Snimanje s ručnim podešavanjem fokusa
Podesite fokus uz pomoć prstena za višestruko ručno podešavanje.
Ako je automatsko fokusiranje zbog uvjeta snimanja otežano, ručno podesite fokus.
● Pritisnite gumb CAMERA FUNCTION za prebacivanje na ručni način rada. (→ 55)
● Upute o određivanju postavki kod uporabe tražila potražite na 55. str.
Zakrenite prsten za višestruko ručno podešavanje kako biste podesili fokus.
1 (Prilikom korištenja pomoći pri ručnom podešavanju fokusa)
Odaberite izbornik.
: [RECORD SETUP] (Postavke snimanja → [MF ASSIST] (Pomoć pri ručnom
podešavanju fokusa) → [ON] (Uklj.)
● Može se postaviti iz brzog izbornika. (→ 33)
● Dodirnite za prikaz ikone ručnog postavljanja.
2 Dodirnite [FOCUS].
3 Dodirnite [MF] za promjenu na ručno
podešavanje fokusa.
● Na zaslonu se pojavljuje MF.
4 Podesite fokus zakrećući prsten za
višestruko ručno podešavanje.
Područje unutar fokusa označeno je plavom bojom.
Uobičajeni se zaslon vraća otprilike 2 sekunde nakon što
dovršite fokusiranje objekta snimanja.
● Kad je funkcija [MF ASSIST] isključena [OFF], područje
označeno plavom bojom se ne prikazuje.
● Da biste se vratili na automatski fokus, dodirnite [AF] u 3. koraku ili ponovo pritisnite gumb
inteligentnog automatskog načina rada.
● Prilikom podešavanja fokusa, ne možete zumirati koristeći prsten za višestruko ručno
podešavanje.
● Plavi prikaz ne javlja se na stvarno snimljenim slikama.
Dio označen plavom bojom
A