Operating Instructions

- 58 -

Recording motion pictures with more vivid colours, using x.v.Colour

™

technology.

≥ Switch to manual mode. (l 65)

≥ Set [REC MODE] to [HA], [HG], [HX] or [HE] (l 52), or set to 1080/50p recording

mode. (l 41)

≥ For more realistic colours, use an HDMI mini cable with a TV that supports the

x.v.Colour

™

≥ When motion pictures recorded while this function is turned [ON] are played back

with a TV not compatible with x.v.Colour

™

, colours may not be reproduced properly.

≥ To play back images recorded in the digital cinema colour with vivid colours of wider colour

ranges, a device compatible with x.v.Colour

™

is required. When these images are played

back with devices other than ones compatible with x.v.Colour

™

, it is recommended to

record the images after this function is turned [OFF].

≥ x.v.Colour

™

is a name for devices that are compatible with the xvYCC format, an

international standard for expanded colour in motion pictures, and that follow the rules for

signal transmission.

Message is displayed when this unit is moved rapidly.

When “CAMERA PANNING IS TOO FAST.” appears, move the unit slowly while recording.

≥ Message will not appear while pausing the recording. (Message will appear even if it is

pausing the recording if [DEMO MODE] is set to [ON].)

This will reduce the wind noise coming into the built-in microphones while maintaining the

realism.

≥ Switch to manual mode. (l 65)

≥ This function’s default setting is [ON].

≥ When switching to intelligent auto mode, [WIND NOISE CANCELLER] is set to [ON], and

the setting cannot be changed.

≥ You may not see the full effect depending on the recording conditions.

[Digital Cinema Colour]

: [RECORD SETUP] # [Digital Cinema Colour] # [ON]

[SHOOTING GUIDE]

: [RECORD SETUP] # [SHOOTING GUIDE] # [ON]

[WIND NOISE CANCELLER]

: [RECORD SETUP] # [WIND NOISE CANCELLER] # [ON]