Operating Instructions
- 70 -
4 Adjust the 3D Conversion Lens attachment part following the
instructions on the screen.
≥ 2 screens will appear.
5 Touch [EXIT] to end the adjustment.
≥ After adjustment, a single screen appears.
≥ When re-attaching the 3D Conversion Lens or
after an impact etc., it is recommended that you
perform the adjustment again.
6 Press the recording start/stop button to
start recording.
≥ Start recording after removing the Lens front cap.
≥ When the 3D Conversion Lens is attached, the zoom position is fixed, and the zoom
operation is disabled.
≥ When recording in 3D, the image will appear with grey frame around it. The grey frame will
be recorded in the video.
≥ Use of a tripod is recommended for recording with a stable picture.
≥ [ECONOMY] will not work while you adjust the 3D Conversion Lens attachment position.
≥ When the 3D Conversion Lens is attached, the auto slow shutter setting is [AUTO SLOW
SHTR (3D)]. The default setting of [AUTO SLOW SHTR (3D)] is [ON]. (l 57)
≥ While 3D recording if moving the unit fast, the message is more likely to appear.
≥ If the unit is turned on in the shade, etc., the screen may appear to be blue. In such a case,
removing the lens cap will return the screen to normal.
To ensure that the 3D video can be safely viewed, pay attention to the following
points when recording.
≥ Where possible, record with the unit in a horizontal state.
≥ Do not get too close to the subject. (record from a distance of at least 1.2 m.)
≥ When moving the unit as you record, move it slowly.
≥ Try to hold the unit as steady as possible when recording while riding in a vehicle or
walking.
3D
0h00m00s0h00m00s0h00m00s
R 1h20mR 1h20mR 1h20m
HG
A appears.
3D