Operating instructions

100
VQT1G66
With other products
With other products
With a TV
The motion pictures and still pictures recorded
on this unit can be played back on a TV screen.
Connect this unit to a TV with one of the
following terminals. When connecting to a
HDMI terminal, a connection cable (optional)
is necessary.
¬Difference in picture quality
depending on the terminal used for
connection
A High Definition images
B Standard images until now
C HDMI terminal
D Component terminal
E Video terminal
≥ Connect with the AV cable for pictures
recorded in conventional standard picture
quality. The pictures cannot be played back in
high definition picture quality.
≥ Do not use any other AV cables except the
supplied one.
≥ Do not use any other component cables except
the supplied one.
≥ Use the AC adaptor to free you from worrying
about the battery running down.
ª To display the on-screen
information on the TV
The information displayed on the screen
(operation icon, time code etc.) can be displayed
on the TV.
Press the EXT DISPLAY button on
the remote control.
≥ Press the button again to erase the
information.
≥ The screen on this unit will not change.
Playback on TV
TV you use Reference items
TV with a HDMI
terminal
1 Connecting with
a HDMI cable
(optional)
(l 101)
TV with a
component terminal
2 Connecting with
the component
cable (supplied)
and the AV
cable (supplied)
(l 103)
Other TVs
3 Connecting with
the AV cable
(supplied)
(l 104)
A
CDE
B
Refer to the following support site for
information about the Panasonic TVs that
you can directly insert an SD card into the
SD card slot on the TV and then play it
back.
http://panasonic.net/
≥ For details on how to play back, please read
the operating instructions for the TV.
ZOOM
START/
STOP
PHOTO
SHOT
EXT
DISPLAY
DATE/
TIME
VOL
HDC-SX5-VQT1G66_mst.book 100 ページ ２００７年７月２４日 火曜日 午後５時５６分