Operating instructions

109
VQT1G66
With other products
With a DVD recorder or video
device
Dubbing images onto a connected DVD recorder
or video device
≥ Images are dubbed in standard picture
quality.
≥ Use the AC adaptor to free you from worrying
about the battery running down.
1 Connect this unit and a video
device.
A AV cable (supplied)
≥ Insert the plugs as far as they will go.
≥ If your recorder is not equipped with AV Input
Sockets, the 21-pin Adaptor B (optional) is
necessary. Consult your dealer.
2 Set the mode dial to to turn
on the power.
3 Change the input channel on the
video device and TV.
≥ The channel set will differ depending on the
terminal to which the unit is connected.
4 Start playback on this unit.
5 Then start recording on the
connected device.
≥ See the operating instructions of the video
device for details.
To stop dubbing
1) Stop recording on the connected device.
2) Then stop playback on this unit.
≥ If the date and time display and function
indication are unnecessary, cancel them
before dubbing. (l 46, 100)
Dubbing images onto a
connected DVD recorder or
video device
ＲＡＭ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
-ＲＷ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
-Ｒ
ＨＤ
ＨＤ
ＨＤ
ＨＤ
-Ｒ ＤＬ
VIDEO
PHOTO
ＲＡＭ
-ＲＷ（ＶＲ）
-ＲＷ（Ｖ）
-Ｒ
-Ｒ ＤＬ
If the dubbed images are played back on a
wide-screen TV, the images may be stretched
vertically.
In this case, refer to the operating instruction
of the device you are connecting to or read the
operating instructions of the wide-screen TV
and set the aspect ratio to 16:9.
HDC-SX5-VQT1G66_mst.book 109 ページ ２００７年７月２４日 火曜日 午後５時５６分